Page 1 of 1
PC-3000 Flash (SSD Edition)
Posted: August 23rd, 2011, 3:02
by Alan2
Does anyone own the PC-3000 flash (SSD) edition or have any experience with it? I believe this is still a fairly new tool. In the near future to stay in the data recovery business, a tool like this will be mandatory to read the flash memory from flash drives and SSD hard drives. Does someone know or have an opinion, if the PC-3000 Flash (SSD Edition) a mature worthwhile tool or is it still a work in progress? Any feedback would be appreciated.
Re: PC-3000 Flash (SSD Edition)
Posted: August 23rd, 2011, 17:34
by Cleanroom
I own one and I also own Soft center, and I use soft center 99% of the time. I only use the PC-3000 for a second opinion on a flash if soft center gives me weird results.
It is getting better, but I would invest in soft center. Also soft center forum help is much better. and they update the software very frequently.
Re: PC-3000 Flash (SSD Edition)
Posted: August 27th, 2011, 16:26
by craig6928
product and the forum is more supported to the russian market
and not the english market.
soft center is a good product but you have to know how to use it
no good for a novice unless you know about the programming side
as for ssd you wont see then taking over the hard drive world
platters are here to stay for good