Page 1 of 1
Seagate App Code Error
Posted: September 15th, 2011, 11:34
by hddnb
Hello Everyone. Any guru had this error and could share your solution please?
Seagate Momentus 7200.2, 2.5", 120GB
ST9120823AS
FW: 3.ADB
No clicks/busy
Terminal info:
Reset
4096 X 16 DRAM
GALILE0-1_Disk SE_0E 05-15-07_18:12
HM SFI
!
ERR FF: App Code
F>
Re: Seagate App Code Error
Posted: September 16th, 2011, 4:27
by hddguy
App code could be damaged. Service head could be dirty/contaminated/too weak to read. Maybe there are bad sectors at the SA.
You tried to read app code in Safe mode?
Re: Seagate App Code Error
Posted: September 16th, 2011, 16:42
by hddnb
Thank you, hddguy. In safe mode, reading App gave me:
Code -FF Track 0F305.0.1B1 sns 1B1
Seems not successful.
Re: Seagate App Code Error
Posted: September 16th, 2011, 16:59
by hddguy
Was this HDD dropped?
Re: Seagate App Code Error
Posted: September 16th, 2011, 17:56
by hddnb
don't know about it.
Re: Seagate App Code Error
Posted: September 22nd, 2011, 11:40
by hddnb
Just wanna make sure if any solutions for F> level data recovery. Somebody said if a hdd got into F> mode, data have gone in most cases.
Re: Seagate App Code Error
Posted: March 25th, 2012, 0:45
by fanrangbing
找一样的LDR资源，能过DE虚拟