No Phy: Staggered spin bypass ???????

Data recovery and HDD repair discussions

Discussions related to PC-3000
Please no pirated software here!
Post a reply
ipcsc
  • ipcsc
  • Posts: 28
  • Joined: November 26th, 2011, 3:01
  • Location: 13445612

No Phy: Staggered spin bypass ???????

November 30th, 2011, 7:20

seagate 7200.11

Rst 0x10M
RW subfile error 205f
RW subfile error 205f
ASCII Diag mode

F3 T>m0,2,1,,,,,22
Max Wr Retries = 00, Max Rd Retries = 00, Max ECC T-Level = 14, Max Certify Rewrite Retries = 2DF8

User Partition Format 3% complete, Zone 00, Pass 00, LBA 00031FE9, ErrCode 00000080, Elapsed Time 0 mins 30 secs
User Partition Format Successful - Elapsed Time 0 mins 30 secs

F3 T>
Spinning Down

Spin Down Complete
Elapsed Time 6.015 secs
Delaying 5000 msec

Jumping to Power On Reset
Rst 0x10M

(P) SATA Reset
PASSPackage Verified
No Phy: Staggered spin bypass
ASCII Diag mode

F3 T>/1

F3 1>N1
Clear SMART is completed.
F3 1>
Rst 0x10M
(P) SATA Reset
PASSPackage Verified
No Phy: Staggered spin bypass
ASCII Diag mode

F3 T>

:?: :?: :?:
northwind

Re: No Phy: Staggered spin bypass ???????

November 30th, 2011, 8:43

What are you trying to accomplish?

That message you mention can be ignored, AFAIK. Can you access sectors?
ipcsc
  • ipcsc
  • Posts: 28
  • Joined: November 26th, 2011, 3:01
  • Location: 13445612

Re: No Phy: Staggered spin bypass ???????

November 30th, 2011, 9:37

My english is poor.
Can speak chinese?
ipcsc
  • ipcsc
  • Posts: 28
  • Joined: November 26th, 2011, 3:01
  • Location: 13445612

Re: No Phy: Staggered spin bypass ???????

November 30th, 2011, 9:39

Couldn't get at the computer.
ipcsc
  • ipcsc
  • Posts: 28
  • Joined: November 26th, 2011, 3:01
  • Location: 13445612

Re: No Phy: Staggered spin bypass ???????

November 30th, 2011, 9:40

ipcsc wrote:Couldn't get at the computer.



Instructions may have asked in access sectors.
ipcsc
  • ipcsc
  • Posts: 28
  • Joined: November 26th, 2011, 3:01
  • Location: 13445612

Re: No Phy: Staggered spin bypass ???????

November 30th, 2011, 10:03

northwind wrote:What are you trying to accomplish?

That message you mention can be ignored, AFAIK. Can you access sectors?


Started with bad company and was just a read-only was now state the。

Software can't get

my terminal assess sectors.
hddguy
  • hddguy
  • Posts: 2984
  • Joined: November 9th, 2006, 15:15

Re: No Phy: Staggered spin bypass ???????

November 30th, 2011, 10:09

ipcsc wrote:
Started with bad company and was just a read-only was now state the。

Software can't get

my terminal assess sectors.


I dont understand a single thing here...
northwind

Re: No Phy: Staggered spin bypass ???????

November 30th, 2011, 10:13

wait...

你试图完成的任务是什么？

你提到的消息可以被忽略，AFAIK。您可以访问部门吗？ :mrgreen:
ipcsc
  • ipcsc
  • Posts: 28
  • Joined: November 26th, 2011, 3:01
  • Location: 13445612

Re: No Phy: Staggered spin bypass ???????

November 30th, 2011, 10:31

会中文啊，呵呵
这块盘现在不认盘啊，得在指令下能正常认盘啊，这个No Phy: Staggered spin bypass
问号，怎么处理？

之前这个盘是有大量色块和坏道，整来整去就变成205F只读了，修完只读就成现在这个样了，盘也不认，在udma3000里也认不到model,这盘能修认盘了吗？这盘太垃圾了，修100多盘也没遇上这么一块，头晕 :shock:
还有，怎么开跑selfscan?
Last edited by ipcsc on November 30th, 2011, 10:36, edited 1 time in total.
ipcsc
  • ipcsc
  • Posts: 28
  • Joined: November 26th, 2011, 3:01
  • Location: 13445612

Re: No Phy: Staggered spin bypass ???????

November 30th, 2011, 10:34

hddguy wrote:
ipcsc wrote:
Started with bad company and was just a read-only was now state the。

Software can't get

my terminal assess sectors.


I dont understand a single thing here...


dont？
怎么不个懂？
hddguy
  • hddguy
  • Posts: 2984
  • Joined: November 9th, 2006, 15:15

Re: No Phy: Staggered spin bypass ???????

November 30th, 2011, 10:37

This obviously is not a serious thread...
ipcsc
  • ipcsc
  • Posts: 28
  • Joined: November 26th, 2011, 3:01
  • Location: 13445612

Re: No Phy: Staggered spin bypass ???????

November 30th, 2011, 10:39

现在得叫它认盘之后是砍段啊，还是怎么的，唉，这要是有N多这盘可费死劲了，打死也不修 :mrgreen:
ipcsc
  • ipcsc
  • Posts: 28
  • Joined: November 26th, 2011, 3:01
  • Location: 13445612

Re: No Phy: Staggered spin bypass ???????

November 30th, 2011, 10:42

hddguy wrote:This obviously is not a serious thread...

advice Brillient Idea :mrgreen:
northwind

Re: No Phy: Staggered spin bypass ???????

November 30th, 2011, 14:36

该消息“无PHY交错”是没有问题的。这是正常的消息。

您的磁盘的问题是在其他地方。

您可以在此驱动器无法启动SELFSCAN。即使你能，所有数据将会丢失。

我的中国是怎样？ :mrgreen:
northwind

Re: No Phy: Staggered spin bypass ???????

November 30th, 2011, 14:36

Sorry everyone, I'm just trying to explain to OP that this message he refers to is of no importance and that selfscan would kill his data (even if you could initiate it...)
ipcsc
  • ipcsc
  • Posts: 28
  • Joined: November 26th, 2011, 3:01
  • Location: 13445612

Re: No Phy: Staggered spin bypass ???????

December 1st, 2011, 10:55

大哥你要指令不，我大都看不懂，你要明白，给翻译一下呗？这里能上传吗？
我不要数据，就是想修好这块盘，有好几个磁头坏的，开盘换好能用，哈哈
还有 几个坏道多的，没整了
色块多的整好十几片吧，呵呵
Attachments
12指令集.rar
(160.44 KiB) Downloaded 6138 times
ipcsc
  • ipcsc
  • Posts: 28
  • Joined: November 26th, 2011, 3:01
  • Location: 13445612

Re: No Phy: Staggered spin bypass ???????

December 1st, 2011, 11:00

northwind wrote:该消息“无PHY交错”是没有问题的。这是正常的消息。

您的磁盘的问题是在其他地方。

您可以在此驱动器无法启动SELFSCAN。即使你能，所有数据将会丢失。

我的中国是怎样？ :mrgreen:

``````````````````
正常消息？那为啥在电脑上和udma 3000上认不能正常认到该盘？
ipcsc
  • ipcsc
  • Posts: 28
  • Joined: November 26th, 2011, 3:01
  • Location: 13445612

Re: No Phy: Staggered spin bypass ???????

December 1st, 2011, 11:04

谁能给翻译一下就翻译一下吧，谢谢咯 :D
northwind

Re: No Phy: Staggered spin bypass ???????

December 1st, 2011, 11:43

ipcsc wrote:``````````````````
正常消息？那为啥在电脑上和udma 3000上认不能正常认到该盘？


because your disk has some other problem. BSY error? Heads?
因为你的磁盘有一些其他的问题。BSY错误？头？
ipcsc
  • ipcsc
  • Posts: 28
  • Joined: November 26th, 2011, 3:01
  • Location: 13445612

Re: No Phy: Staggered spin bypass ???????

December 2nd, 2011, 3:43

northwind wrote:
ipcsc wrote:``````````````````
正常消息？那为啥在电脑上和udma 3000上认不能正常认到该盘？


because your disk has some other problem. BSY error? Heads?
因为你的磁盘有一些其他的问题。BSY错误？头？

原来吧，这块盘是认盘的，就是前面有一百来个大红块，不是连着的，中间后面局部有绿块用MHDD检测。现在的状态吧，头无问题 ，测固件区没问题 ，读固件没问题 ，但我就是不知道那个显示的是什么，不是BSY是就绪的状态
Post a reply
Switch to full style

Powered by phpBB © phpBB Group.

Board index