HDD GURU FORUMS
http://forum.hddguru.com/

PC3000-UDMA latest English instruction!
http://forum.hddguru.com/viewtopic.php?f=11&t=21178
Page 1 of 1

Author:  ccssi [ November 20th, 2011, 1:54 ]
Post subject:  PC3000-UDMA latest English instruction!

Who has PC3000-UDMA latest English instruction! I take TREX exchange, thank you!!!! ICQ: 130203879!

Author:  pcimage [ November 20th, 2011, 6:52 ]
Post subject:  Re: PC3000-UDMA latest English instruction!

Why are you asking for this here?

If you have UDMA, then manuals were supplied with it, or you can download from ACE.

Author:  Cris [ November 23rd, 2011, 8:36 ]
Post subject:  Re: PC3000-UDMA latest English instruction!

I personally find it useful to review product manuals as a way to determine specific functionality (without marketing hype) to assist in purchasing decisions.

Many times I have seen claims that a product does something, only to read the manual and discover it is not the case.

I have seen many people complain (after purchase) about the quality of manuals for other tools. So it would be beneficial to have been able to review the manuals in advance.

I presume peoples' objections to the idea of having access to product manuals is because the manuals contain valuable information that is useful even without the product in question or because they suspect the person requesting the manuals has pirated products. Although I am surprised that anyone capable of pirating products is not also capable of pirating manuals to go with them.

Author:  labtech [ November 27th, 2011, 0:40 ]
Post subject:  Re: PC3000-UDMA latest English instruction!

Cris wrote:
I personally find it useful to review product manuals as a way to determine specific functionality (without marketing hype) to assist in purchasing decisions.

Many times I have seen claims that a product does something, only to read the manual and discover it is not the case.

I have seen many people complain (after purchase) about the quality of manuals for other tools. So it would be beneficial to have been able to review the manuals in advance.

I presume peoples' objections to the idea of having access to product manuals is because the manuals contain valuable information that is useful even without the product in question or because they suspect the person requesting the manuals has pirated products. Although I am surprised that anyone capable of pirating products is not also capable of pirating manuals to go with them.


Not Ace's UDMA.

Also some of the newest release features or updates are not necesserarily available in a new manual. It is expensive and time-consuming to update manuals, thus just have to be aware of these updates.

Author:  labtech [ November 27th, 2011, 0:48 ]
Post subject:  Re: PC3000-UDMA latest English instruction!

Also not every hardware and software data recovery solution out there is 100% bullet proof error free. Again, most of these solutions are basically reversed engineered based on a very limited amount of information provided by manufacturers. So, it is nearly impossible for a developer to ensure that a solution applies to hundreds of different model drives with occasionally strange failures. It is unrealistic that a developer can foresee all possible failures and be able to overcome each one.

Author:  hawk_wd [ November 28th, 2011, 6:53 ]
Post subject:  Re: PC3000-UDMA latest English instruction!

have anyone the manual please?

Author:  ici_lemmy [ November 28th, 2011, 8:13 ]
Post subject:  Re: PC3000-UDMA latest English instruction!

pcimage wrote:
If you have UDMA, then manuals were supplied with it, or you can download from ACE.

Author:  hawk_wd [ November 28th, 2011, 10:18 ]
Post subject:  Re: PC3000-UDMA latest English instruction!

can u tell me the link?

Author:  ici_lemmy [ November 28th, 2011, 10:58 ]
Post subject:  Re: PC3000-UDMA latest English instruction!

In your update box

Author:  ipcsc [ December 1st, 2011, 11:09 ]
Post subject:  Re: PC3000-UDMA latest English instruction!

不好意思啊,能看懂你们说啥,不过我写中文快点,呵呵见谅了

udma 3000修11.12代seagte盘,还不如用指令修了,软件的功能有限,但是别的盘还可以吧,TREX是厂家专用的软件,这个要是整明白了,比pci udma 3000里的WD功能要强的很多哦,呵呵 :mrgreen:

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/