HDD GURU FORUMS

Data recovery and HDD repair discussions
http://forum.hddguru.com/

LDR needed for Sabre53 Western Digital

http://forum.hddguru.com/viewtopic.php?f=11&t=21906

Page 1 of 1

LDR needed for Sabre53 Western Digital

Posted: January 30th, 2012, 17:57
by BytesBack
Greetings,

I'm looking for an LDR file for a WD800BB-22JMC0, ROM firmware (native board) is 00008008C. Please let me know if any of you have one available. Thanks!

Steve

Bytes Back

Re: LDR needed for Sabre53 Western Digital

Posted: January 31st, 2012, 14:05
by rameez
LDR for Marvell :shock:

Re: LDR needed for Sabre53 Western Digital

Posted: January 31st, 2012, 17:53
by BytesBack
Yeah, PC-3000 was suggesting in the log that I needed to upload an LDR because of a device error. Turned out to be a non-native PCB.

Thanks for checking, rameez!

Re: LDR needed for Sabre53 Western Digital

Posted: February 1st, 2012, 1:30
by rameez
You need to write module 11 to hdd .
All times are UTC - 5 hours [ DST ]
Page 1 of 1
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/