Page 1 of 1

WD3200AAKS-75L9A0 FW+ROM

Posted: February 22nd, 2012, 14:26
by sempre
Hi to all!!
Necessary is ROM+MODS ALL

WD3200AAKS-75L9A0
DATE:13 MAR 2010


infos hdd

>Techno mode key
>Techno mode key......................... : Ok
>
>RAM:
>HDD Info reading........................ : Ok
>Heads number............................ : 2
>Cyl Count............................... : 170
>
>Zone allocation table................... : Ok
>SA SPT.................................. : 1311
>
>ROM:
>ROM reading............................. : Ok
>ROM Data size........................... : 192 Kb
>ROM version............................. : 05.F9E
>ROM generation.......................... : 05.F9E
>Link table version...................... : 04.0F.
>Consolidated ROM version................ : 000500F9
>
>ROM Modules:
>Flash ROM dir reading................... : Ok
>Modules directory address............... : FIXED
>Heads configuration..................... : by map
>Heads number............................ : 2
>Heads number in use..................... : 2
>Switched off heads...................... : No
>Heads map............................... : 0,1
>ROM Firmware version.................... : 000500F9
>
>Service area:
>SA dir reading.......................... : Ok
>SA Access............................... : Copy 1
>
>Configuration reading................... : Ok

Re: WD3200AAKS-75L9A0 FW+ROM

Posted: February 22nd, 2012, 18:14
by pcimage
What is actual problem?

Re: WD3200AAKS-75L9A0 FW+ROM

Posted: February 23rd, 2012, 8:22
by sempre
pcimage wrote:What is actual problem?


not initialize the SA CLICKING...

not initialize the SA BEFORE CLICKING had bad modules (21,22,31,32,2e,6f, 121) CLICKING

Re: WD3200AAKS-75L9A0 FW+ROM

Posted: February 23rd, 2012, 10:29
by F_ARG
Hello,

I send you modules, but i don t have ROM.

Best regards,

F

Re: WD3200AAKS-75L9A0 FW+ROM

Posted: May 3rd, 2012, 22:51
by selftest
F_ARG wrote:Hello,

I send you modules, but i don t have ROM.

Best regards,

F

Addtion for F_ARG, this is Rom.