If you have PC3000 UDMA, there is a procedure to work around this in most cases and I can help you with this (although ACE technical should be doing it)
If you don't have it, then you are stuck I'm afraid
| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| STM3320820A http://forum.hddguru.com/viewtopic.php?f=11&t=22150 |
Page 1 of 1 |
| Author: | barak [ February 23rd, 2012, 11:01 ] |
| Post subject: | STM3320820A |
After head change I get this on my utility: ----------------------------------------------------------------- Reset 4096k x 16 DRAM GALAXY - 1_Disk S-6D 09-22-06_15:48 HM SFI ! $SFI AMR (P)PATA Reset $SFI AMR $$$SFI AMR $$SFI AMR $$$SFI AMR DiskAccess ReadSector EC=47 at ffffffff.00.0002 $SFI AMR $$$SFI AMR DiskAccess ReadSector EC=47 at ffffffff.00.0002 Read Ver Retrys DiskAccess ReadSector EC=47 at ffffffff.00.0002 Read Ver Retrys DiskAccess ReadSector EC=47 at ffffffff.00.0002 Read Ver Retrys DiskAccess ReadSector EC=47 at ffffffff.00.0002 Read Ver Retrys DiskAccess ReadSector EC=47 at ffffffff.00.0002 Read Ver Failure! DiskAccess ReadSector EC=47 at ffffffff.00.022b Failed sys sect. write! Nwt Er 00 RdWr 162f6.00.022b DiskAccess ReadSector EC=47 at ffffffff.00.0080 DiskAccess ReadSector EC=47 at ffffffff.00.0080 Unable To Load Overlay 01|000A T> ----------------------------------------------------------------------------------------------- Any ideas, please? |
|
| Author: | pcimage [ February 23rd, 2012, 11:12 ] |
| Post subject: | Re: STM3320820A |
If you have PC3000 UDMA, there is a procedure to work around this in most cases and I can help you with this (although ACE technical should be doing it) If you don't have it, then you are stuck I'm afraid
|
|
| Author: | barak [ February 23rd, 2012, 12:29 ] |
| Post subject: | Re: STM3320820A |
Yes, I do have it. Actually above is from PC3000 terminal. No one from AceLab was available so I turned to this forum. |
|
| Author: | barak [ February 23rd, 2012, 13:10 ] |
| Post subject: | Re: STM3320820A |
Ok, I could solve it by myself. Thanks for the tip though. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|