Hi to all!
WD250ABYS-18B7A0
The problem connecting the hd it does not turn the platter and gets busy.
I have several donors (03).
Not accesses SA (HOT SWAP). Not accepting loaders (mod 11).
Should I try to change the engine chip? (pcb)
| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| WD PCB BAD http://forum.hddguru.com/viewtopic.php?f=11&t=24789 |
Page 1 of 1 |
| Author: | sempre [ December 27th, 2012, 8:11 ] |
| Post subject: | WD PCB BAD |
Hi to all! WD250ABYS-18B7A0 The problem connecting the hd it does not turn the platter and gets busy. I have several donors (03). Not accesses SA (HOT SWAP). Not accepting loaders (mod 11). Should I try to change the engine chip? (pcb)
|
|
| Author: | northwind [ December 27th, 2012, 10:00 ] |
| Post subject: | Re: WD PCB BAD |
I'd check for stiction and then swap pcb before anything else. |
|
| Author: | sempre [ December 27th, 2012, 13:03 ] |
| Post subject: | Re: WD PCB BAD |
northwind wrote: I'd check for stiction and then swap pcb before anything else. PM |
|
| Author: | northwind [ January 10th, 2013, 4:05 ] |
| Post subject: | Re: WD PCB BAD |
|
|
| Author: | sempre [ February 2nd, 2013, 14:05 ] |
| Post subject: | Re: WD PCB BAD |
sempre wrote: northwind wrote: I'd check for stiction and then swap pcb before anything else. PM solved success!! 
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|