Discussions related to PC-3000
Please no pirated software here!
Post a reply

SEAGATE HEAD CHANGE

March 4th, 2009, 9:16

Hi to all,

Afther change heads in the disk i have this.

PCB is from donor
HEADS from donor

Code:
Reset
4096k x 16 DRAM
GALAXY2D - 1_Disk    S-6A   05-31-06 13:44
Head Mask FFFF - Switch to full int.
              Spin Ready
ERR Read App Code

F>



Platter have this:
ST-HEAD.jpg


Thanks
Ze

Re: SEAGATE HEAD CHANGE

March 4th, 2009, 11:25

What are the drive models? PN ? FW? Country ?
If original pcb is ok always use that.

Best regards,

Dobre

Re: SEAGATE HEAD CHANGE

March 4th, 2009, 11:35

Hi Dobre,

ST3320820AS.jpg
ST3320820AS.jpg (37.18 KiB) Viewed 12574 times


The original PCB is OFF :(

Flash Rom Erased

ST3320820AS1.jpg



Thanks
Ze

Re: SEAGATE HEAD CHANGE

March 4th, 2009, 14:42

Zebong,
You should perform terminal command
F>R4
And then paste here result (A3 or A6?)
A3: App code damaged (BAD's in SA)
A6: Incompatible App code (PCB is incompatible)
If A6 - change PCB and see;
If A3 - you should find compatible Loader (same Eng Rev with patient) and load only App code.
Then F>j.
But don't write to SA anything (App code for example).

Re: SEAGATE HEAD CHANGE

March 5th, 2009, 8:35

Thanks Creator,

Have this in terminal.

Code:
Reset
4096k x 16 DRAM
GALAXY2D - 1_Disk    S-6A   05-31-06 13:44

Buzz  - Head Mask FFFF - Switch to full int.
              Spin Ready
ERR Read App Code

F>R4
    Code - FF  Track 15A76.0.022  Sns 022
F>

Re: SEAGATE HEAD CHANGE

March 5th, 2009, 10:36

zebong wrote:Thanks Creator,

Have this in terminal.

Code:
Reset
4096k x 16 DRAM
GALAXY2D - 1_Disk    S-6A   05-31-06 13:44

Buzz  - Head Mask FFFF - Switch to full int.
              Spin Ready
ERR Read App Code

F>R4
    Code - FF  Track 15A76.0.022  Sns 022
F>


FF - Unsupported preamp? :shock:

Re: SEAGATE HEAD CHANGE

March 6th, 2009, 3:05

FF=Unsupported code in the new preamp interface....Looks like incompatible heads.
Rgds

Re: SEAGATE HEAD CHANGE

March 6th, 2009, 14:53

Hi ccc,

Look at my patient / donor :


st-320-sata.jpg


What do you think is possible to have different preamp ?

Thanks
ZeBong

Re: SEAGATE HEAD CHANGE

March 6th, 2009, 21:20

start a loader and see what happen..
maybe we can discuss OL
See My PM

Re: SEAGATE HEAD CHANGE

March 13th, 2009, 1:31

check the preamp ic-chip and see if its matches with the other one
it looks to use that its using a diffrent type ic

dirty tricks of seagate to stop us recovering hard drives :(

Re: SEAGATE HEAD CHANGE

February 4th, 2013, 18:47

hi , How do you do the scratches on your disc surface
used during the head is broken

Re: SEAGATE HEAD CHANGE

February 4th, 2013, 18:55

hi dear friends you can turn head tool
Attachments
2012-12-12 17.07.58.jpg
2012-12-12 17.07.16.jpg
2013-01-16 03.02.03.jpg
2013-01-16 03.02.32.jpg
2013-01-16 03.03.58.jpg
2013-01-27 03.05.34.jpg
2013-01-27 03.04.58.jpg
2013-01-27 03.03.35.jpg

Re: SEAGATE HEAD CHANGE

February 8th, 2013, 20:26

hi, data recovery device for scratched surface

could you give information
Post a reply