| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| Maxtor Pro 500 7H500F0 Safe Mode http://forum.hddguru.com/viewtopic.php?f=11&t=28172 |
Page 1 of 1 |
| Author: | ddrecovery [ March 14th, 2014, 14:56 ] |
| Post subject: | Maxtor Pro 500 7H500F0 Safe Mode |
This is a grizzly family drive. Is it possible to start the drive in safe mode? I have the PC-MXSAFE adapter connected as shown in the manual (presume its the two pins immediately next to the SATA port, and green wire next to the SATA port). I have no jumpers set on the MX board. MX board is powered on. I get DRD DWF DRQ CRR flags. The PCB is good as I have tested it on another drive. Any idea? |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|