HDD GURU FORUMS

Firebird 2.5" family

View ROM information
ROM Data size........................... : 256 Kb
Firmware version........................ : 0003004A

Urgent!

I have FW version 00030052 or 00030038 but not the 4A

Might be worth trying if you want.

Maybe this helps - same family - not my resource, just noticed it
http://files.hddguru.com/index.php?acti ... /Firebird&

Thanks friends. I will try it from labtech link and let you know.

Here's the two I have if you want to try them.

I have one for 0003000M.
Test it.

Here is loader from the version you want.

Best of luck.

>Techno mode key
>Techno mode key......................... : Ok
>
>RAM:
>HDD Info reading........................ : Ok
>Heads number............................ : 4
>Cyl Count............................... : 256
>
>Zone allocation table................... : Ok
>SA SPT.................................. : 1420
>
>ROM:
>ROM reading............................. : Ok
>ROM Data size........................... : 256 Kb
>ROM version............................. : 03.4AB
>ROM generation.......................... : 03.4BB
>Link table version...................... : TP.46.
>Consolidated ROM version................ : 0003004A
>
>ROM Modules:
>Flash ROM dir reading................... : Ok
>Flash ROM dir (ext) reading............. : Ok (Active)
>Modules directory address............... : 214 608 (32)
>SA regions address...................... : by default
>
>SA Translator loading................... : Ok
>
>Heads configuration..................... : by map
>Heads number............................ : 4
>Heads number in use..................... : 4
>Switched off heads...................... : No
>Heads map............................... : 0,1,2,3
>ROM Firmware version.................... : 0003004A
>
>Service area:
>SA dir reading (ID)..................... : Ok
>SA Access............................... : Copy 0,Copy 1
>

i have the match one 0003004A

Thanks for all! So far data not recovered, probably I have issue with heads too.

Finally case was solved. Problem was with head compatibility.