View topic - WD800JD-60LSA0

Main » Forums home » PC-3000 support forum

All times are UTC - 5 hours [ DST ]

Switch to mobile style

WD800JD-60LSA0

Page 1 of 1

[ 9 posts ]

Print view

Previous topic | Next topic

Author

Message

walter1

Post subject: WD800JD-60LSA0

Posted: January 16th, 2015, 5:01

Joined: September 9th, 2014, 6:34
Posts: 10
Location: Italy

Hello
Could anyone provide the loader for WD800JD-60LSA0 hdd please
Kind regards

Top

pcimage

Post subject: Re: WD800JD-60LSA0

Posted: January 16th, 2015, 5:12

Joined: November 29th, 2006, 10:08
Posts: 7855
Location: UK

What version?

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!

Top

walter1

Post subject: Re: WD800JD-60LSA0

Posted: January 16th, 2015, 6:10

Joined: September 9th, 2014, 6:34
Posts: 10
Location: Italy

PC3KUDMA auodetect model sabre58

Top

walter1

Post subject: Re: WD800JD-60LSA0

Posted: January 16th, 2015, 6:18

Joined: September 9th, 2014, 6:34
Posts: 10
Location: Italy

PCB model 2060-701335-005 rev.A

Attachments:

File comment: HDD front label

20150116_101352r.jpg [ 276.71 KiB | Viewed 7057 times ]

Top

walter1

Post subject: Re: WD800JD-60LSA0

Posted: January 16th, 2015, 7:00

Joined: September 9th, 2014, 6:34
Posts: 10
Location: Italy

PC3K reports this message at start
and the heads click until the motor stops

Techno mode key
Techno mode key......................... : Ok

RAM:
HDD Info reading........................ : Ok
Heads number............................ : 1
Cyl Count............................... : 64

Zone allocation table................... : HDDs RAM reading error - Device Error Detected: "VSCE PERM OVL NOT LOADED. LDR Upload is recomended"

ROM:
ROM reading............................. : Ok
ROM Data size........................... : 128 Kb
ROM version............................. : 06.BSD
ROM generation.......................... : 06.BSD
Link table version...................... : 01.BC.
Consolidated ROM version................ : 000600BS

ROM Modules:
Heads configuration..................... : by map
Heads number............................ : 1
Heads number in use..................... : 1
Switched off heads...................... : No
Heads map............................... : 1
ROM Firmware version.................... : 06BSD

Service area:
Permanent overlay....................... : Not loaded
SA dir reading (ID)..................... : Unknown error. Error code: 4341

Top

ROb

Post subject: Re: WD800JD-60LSA0

Posted: January 16th, 2015, 7:12

Joined: April 16th, 2008, 4:50
Posts: 263

What Walter means is what is the ROM Ver. ??
Please read carefully

Top

walter1

Post subject: Re: WD800JD-60LSA0

Posted: January 16th, 2015, 7:30

Joined: September 9th, 2014, 6:34
Posts: 10
Location: Italy

Hi ROb thank for your attention
I posted the report.log of PC3K

Top

walter1

Post subject: Re: WD800JD-60LSA0

Posted: January 16th, 2015, 7:39

Joined: September 9th, 2014, 6:34
Posts: 10
Location: Italy

Hi ROb thank for your attention
I posted the report.log of PC3K

Top

pcimage

Post subject: Re: WD800JD-60LSA0

Posted: January 16th, 2015, 8:23

Joined: November 29th, 2006, 10:08
Posts: 7855
Location: UK

Sorry, I don't have that version.

In any case, if the drive clicks and spins down then it's almost certainly a physical issue (e.g. heads bad)

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!

Top

Page 1 of 1

[ 9 posts ]

Main » Forums home » PC-3000 support forum

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 7 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum