Hi

I have a WD3200BEVT-11A03T0 (Pluto family) blown pcb.
I need LDR & resources if possible for rom restoration.
If anyone can help, I would greatly appreciate it.

Thanks for looking.
Kind regards
Eddie

Quiz: Who can point out the problems with this post?

_________________
Buy your friends Toshiba\Hitachi and your enemies Seagate.

- Start by replacing PCB by a working one. IF PCB is blown it will not work no matter is you have loader and resources or not. Buy a PCB from the same drive model as yours.

- If Pre-Amp is not damaged drive should start without clicking but will not work correctly as there will be diferent adaptives on the new PCB, as possible diferent ROM version.

- Use a WD firmware tool lile WDR, Sediv, WDMarvell, or the more expensive ones like PC-3000, MRT, HRT whatever and get a copy of all the modules on the drive. You should be able to access SA and get those modules from YOUR DRIVE.

- You can't use another drive resources to re-create your ROM. You must use the resources FROM YOUR DRIVE as the ROM is unique to your drive so you need to get the copies from YOUR PLATTERS (DO NOT OPEN THE DRIVE - USE A FIRMWARE TOOL lol).

- Now with the copy of your resources you can regen the ROM like this :

http://www.hddoracle.com/viewtopic.php?f=59&t=761

- Write your ROM back to the drive like this :

http://www.hddoracle.com/viewtopic.php?f=86&t=1127

REGARDS.

_________________
1Q9xrDTzTddUXeJAFRn37aqh1Yr6buDCdw - (Bitcoin Donations)
paypal.me/Spildit - (PayPal Donations)
The HDD Oracle - Platform for OPEN research on Data Recovery.

]You should be able to access SA and get those modules from YOUR DRIVE.