HDD GURU FORUMS
http://forum.hddguru.com/

DE -Select what kind of sectors to image
http://forum.hddguru.com/viewtopic.php?f=11&t=32173		 Page 1 of 1
Author:  pclab [ October 24th, 2015, 18:35 ]
Post subject:  DE -Select what kind of sectors to image
Hi

I've tried to find this info and couldn't get it....

In DE, how can I restart/continue to image only some kind of sectors? For instance, only getting the Read Reminder ones (the white ones) and not wanting that it tries to read the black ones in that pass.
On another pass, for instance, only try to read the yellow ones, and not the whites ones. And so on...

Thanks
Author:  pclab [ October 25th, 2015, 7:02 ]
Post subject:  Re: DE -Select what kind of sectors to image
Found it finally. :mrgreen:
Author:  AdrianSRD [ October 26th, 2015, 8:44 ]
Post subject:  Re: DE -Select what kind of sectors to image
pclab wrote:
Found it finally. :mrgreen:



Hello!

I'm glad you found it on your own, maybe if you share here the solution others may find it very useful.

Best regards
Author:  labtech [ October 26th, 2015, 10:07 ]
Post subject:  Re: DE -Select what kind of sectors to image
Create submap based on type of sectors remained.
Author:  Amarbir[CDR-Labs] [ October 26th, 2015, 11:39 ]
Post subject:  Re: DE -Select what kind of sectors to image
labtech wrote:
Create submap based on type of sectors remained.



Hi,
I Would Say PC 3000 Generally Takes 3 Months of Hard Reading To Get To Understand Approx 50% To 75% of It .What a Wast Tool It Is .
Author:  pclab [ October 26th, 2015, 18:29 ]
Post subject:  Re: DE -Select what kind of sectors to image
labtech wrote:
Create submap based on type of sectors remained.


yeah, that was really that.
Author:  pclab [ October 26th, 2015, 18:31 ]
Post subject:  Re: DE -Select what kind of sectors to image
Amarbir wrote:
labtech wrote:
Create submap based on type of sectors remained.



Hi,
I Would Say PC 3000 Generally Takes 3 Months of Hard Reading To Get To Understand Approx 50% To 75% of It .What a Wast Tool It Is .


Hi Amarbir

I saw you on almost every tool manufacturers forums, where you complain on the respective tool.
So, no tool is good for you. Or do you have one?
Why is it PC3K a waste? Because you don't know how to use it?
That's a user problem (at least for me), not a tool problem.
Author:  Amarbir[CDR-Labs] [ October 27th, 2015, 8:44 ]
Post subject:  Re: DE -Select what kind of sectors to image
pclab wrote:
Amarbir wrote:
labtech wrote:
Create submap based on type of sectors remained.



Hi,
I Would Say PC 3000 Generally Takes 3 Months of Hard Reading To Get To Understand Approx 50% To 75% of It .What a Wast Tool It Is .


Hi Amarbir

I saw you on almost every tool manufacturers forums, where you complain on the respective tool.
So, no tool is good for you. Or do you have one?
Why is it PC3K a waste? Because you don't know how to use it?
That's a user problem (at least for me), not a tool problem.


PCLAB ,
Its a Typo I Wanted To Say Wast Waaaasssstttt Tool [ Very Elaborate Tool ]

PS : Cannot Edit Post Now
Author:  Amarbir[CDR-Labs] [ October 27th, 2015, 9:34 ]
Post subject:  Re: DE -Select what kind of sectors to image
PCLAB :D ,
I Just Released Its Called Vast Instead of Wast [Sorry English is Not My First Language ] .
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/