| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| WDC WD5000LMVW-11CKRS0 Encripted http://forum.hddguru.com/viewtopic.php?f=11&t=32181 |
Page 1 of 1 |
| Author: | F_ARG [ October 26th, 2015, 17:05 ] |
| Post subject: | WDC WD5000LMVW-11CKRS0 Encripted |
Hi! I have this WDC WD5000LMVW-11CKRS0, that i can clone using DE and SATA interface, but i cannot decrypt it. I cannot access to western utility cause when i try to identify it i get "HDDs RAM reading error; unexpected error: Abort command: No aditional Sense Information". I tried looking for the encription key for symwave and other encription ICs, but i guess it is a SED cause i haven t found anything. The thing is that when i use usb interface i have exactly the same situation. I can access HDD but look encripted and i don t know why. Any clue? |
|
| Author: | MindMergepk [ October 27th, 2015, 2:44 ] |
| Post subject: | Re: WDC WD5000LMVW-11CKRS0 Encripted |
F_ARG wrote: The thing is that when i use usb interface i have exactly the same situation. I can access HDD but look encripted and i don t know why. Any clue? this doesn't make sense, if you use USB interface the disk should not be encrypted or am i missing something... |
|
| Author: | pclab [ October 27th, 2015, 4:26 ] |
| Post subject: | Re: WDC WD5000LMVW-11CKRS0 Encripted |
Could it be encrypted but another tool and not by the WD encryption chip? Have you asked the client if he was encrypting the data? |
|
| Author: | F_ARG [ October 27th, 2015, 8:44 ] |
| Post subject: | Re: WDC WD5000LMVW-11CKRS0 Encripted |
Hi MindMergepk, pclab. Thanks for your response. It doesn t make sense for me too  . I have asked my client if he had used some encryption but he said that he hadn t.What if someone changed PCB+eeprom (donnor usb PCB + original eeprom)? Could be that? I don t know why i cannot enter western utility. Have someone had same error? Best and thanks for your help! F |
|
| Author: | jermy [ October 27th, 2015, 9:29 ] |
| Post subject: | Re: WDC WD5000LMVW-11CKRS0 Encripted |
F_ARG wrote: What if someone changed PCB+eeprom (donnor usb PCB + original eeprom)? it can easily be checked out, search the ROM for the WWN (you should find it in mod 0D). |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|