| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| Loader for WD30NMVW-11C3NS2 http://forum.hddguru.com/viewtopic.php?f=11&t=33767 |
Page 1 of 1 |
| Author: | data_recovery [ July 12th, 2016, 7:17 ] |
| Post subject: | Loader for WD30NMVW-11C3NS2 |
Hi , I required loader for WD30NMVW-11C3NS2 , if someone has then please share. Thanks Ron |
|
| Author: | pcimage [ July 12th, 2016, 9:17 ] |
| Post subject: | Re: Loader for WD30NMVW-11C3NS2 |
What version? |
|
| Author: | data_recovery [ July 12th, 2016, 9:34 ] |
| Post subject: | Re: Loader for WD30NMVW-11C3NS2 |
ROM version............................. : 01.24C ROM F/W version......................... : 00010024 |
|
| Author: | Corsari [ October 28th, 2016, 2:38 ] |
| Post subject: | Re: Loader for WD30NMVW-11C3NS2 |
Hello friends I'm in a similar situation need the loader for the same drive WD30NMVW-11C3NS2, no one of you have saved these resources? Thank you for any family on PC-3000 6.2 is reported as PebbleB ROM Modules: ROM version............................. : 01.32C ROM F/W version......................... : 00010024 Overlay F/W version..................... : 01.32C Servo F/W version....................... : D3.08 |
|
| Author: | Mikippp [ October 28th, 2016, 6:19 ] | |||
| Post subject: | Re: Loader for WD30NMVW-11C3NS2 | |||
Hi, I have two to choose from Mikippp Code: >ROM Modules: >ROM version............................. : 01.24C >ROM F/W version......................... : 00010024 >Overlay F/W version..................... : 01.25C >Servo F/W version....................... : 03.08 Code: >ROM:
>ROM reading............................. : Ok >ROM Data size........................... : 512 Kb >ROM version............................. : 01.32C >ROM generation.......................... : 01.33C >Link table version...................... : D3.08. >Consolidated ROM version................ : 00010032
|
||||
| Author: | Corsari [ October 28th, 2016, 8:36 ] |
| Post subject: | Re: Loader for WD30NMVW-11C3NS2 |
Thank you so much! My one is 24 |
|
| Author: | Amarbir[CDR-Labs] [ October 29th, 2016, 0:38 ] |
| Post subject: | Re: Loader for WD30NMVW-11C3NS2 |
Hi, Both of you have the same version rom code ,You both should try the loader given by miki But remember its not always the 11 no module sometimes we have to load other loaders also like 5c and 13 ,depends on family ,Might be a person can tryout loading loader on pebble series hdd and see what pc3k loads as it supports this family in version 6.2 .My lab has never encountered this hdd yet so no resources ,Can someone share complete pebbleb resources in pcr file format |
|
| Author: | Corsari [ October 29th, 2016, 1:27 ] |
| Post subject: | Re: Loader for WD30NMVW-11C3NS2 |
Pebbleb Seen yesterday Loads 11 and 10 It worked Cheers |
|
| Author: | Corsari [ October 29th, 2016, 1:37 ] |
| Post subject: | Re: Loader for WD30NMVW-11C3NS2 |
Also I have discovered that full resources are available in the files.hddguru section Thanks so much to the uploader |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|