Please find attached the picture.
Brand: WD
Model: WD20NMVW-11AV3S2.
Thank you for the help.
Best regards,
| Attachments: |
|
File comment: Attached. WD20NMVW-11AV3S2.png [ 4.72 MiB | Viewed 8212 times ] |
| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| How do you match a new head assembly? http://forum.hddguru.com/viewtopic.php?f=11&t=33812 |
Page 1 of 1 |
| Author: | olinyer [ July 19th, 2016, 11:17 ] |
| Post subject: | How do you match a new head assembly? |
Hi, I hope you are doing great. Question: How do you match a new head assembly? Thank you for the help. Best regards, |
|
| Author: | data-medics [ July 19th, 2016, 11:33 ] |
| Post subject: | Re: How do you match a new head assembly? |
That all depends on the model of hard drive, what brand it is, what family, etc. Try posting a picture of your drive label, and we can tell you what to match. |
|
| Author: | olinyer [ July 20th, 2016, 15:05 ] | ||
| Post subject: | Re: How do you match a new head assembly? | ||
Please find attached the picture. Brand: WD Model: WD20NMVW-11AV3S2. Thank you for the help. Best regards,
|
|||
| Author: | jermy [ July 20th, 2016, 15:35 ] |
| Post subject: | Re: How do you match a new head assembly? |
The second drive here will be most likely a match Matching the HM and preamp rev. Can confirm it (Btw providing the no. H and HM and preamp rev. Can "maybe" find more cheaper) this one will be most likely the same FW ver. too (need to check with them) but its a lot of $$$ |
|
| Author: | fzabkar [ July 20th, 2016, 16:04 ] |
| Post subject: | Re: How do you match a new head assembly? |
Headstack matching for Western Digital: http://www.hddoracle.com/viewtopic.php? ... 036&p=4555 |
|
| Author: | olinyer [ July 25th, 2016, 13:04 ] |
| Post subject: | Re: How do you match a new head assembly? |
Thank you for the help. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|