HDD GURU FORUMS

DragFly 3

Ver 00900099

Drive model: WD15EADS-00P8B0

Cheers!!

Sorry, too many 9´s. I don´t have that one

Thanks anyway!

pcimage wrote:DragFly 3

Ver 00900099

Drive model: WD15EADS-00P8B0

Cheers!!

try this 00900014

Thanks but I need 900099

Deleted

heheh
Sean, this was the only one i got close to ur req.
i really don`t know from where your getting those drives

einstein9 wrote:heheh
Sean, this was the only one i got close to ur req.
i really don`t know from where your getting those drives

It's some refurbished crap!

pcimage wrote:

einstein9 wrote:heheh
Sean, this was the only one i got close to ur req.
i really don`t know from where your getting those drives

It's some refurbished crap!

Had to chk my very old SD stock, found those 00900073 0090009A

i don`t think digging more will find better than those.

good luck

From a WD10xxxx DragFly"2"

Thanks, but didn't work.

I need a DragFly3 ROM

>Techno mode key
>Techno mode key......................... : Ok
>
>RAM:
>HDD Info reading........................ : Ok
>Heads number............................ : 4
>Cyl Count............................... : 192
>
>ROM:
>Read ROM................................ : Ok
>ROM Data size........................... : 192 Kb
>Flash ROM dir reading................... : Ok (Active)
>Flash ROM dir reading (Ext)............. : Ok
>Modules directory address............... : 77 995
>SA regions address...................... : by default
>Module 02 access........................ : Granted
>SA Translator loading................... : Ok
>
>ROM Modules:
>ROM version............................. : 90.99N
>ROM F/W version......................... : 00900099
>Overlay F/W version..................... : 90.99N
>Servo F/W version....................... : 03.09

northwind wrote:>Techno mode key
>Techno mode key......................... : Ok
>
>RAM:
>HDD Info reading........................ : Ok
>Heads number............................ : 4
>Cyl Count............................... : 192
>
>ROM:
>Read ROM................................ : Ok
>ROM Data size........................... : 192 Kb
>Flash ROM dir reading................... : Ok (Active)
>Flash ROM dir reading (Ext)............. : Ok
>Modules directory address............... : 77 995
>SA regions address...................... : by default
>Module 02 access........................ : Granted
>SA Translator loading................... : Ok
>
>ROM Modules:
>ROM version............................. : 90.99N
>ROM F/W version......................... : 00900099
>Overlay F/W version..................... : 90.99N
>Servo F/W version....................... : 03.09

Thanks Dimitris, will try that tomorrow

Worked fine after changing the head map and using original mod 47

Cloning now.....

Cheers!!!