HDD GURU FORUMS

Hi Guys,

I'm just wondering if any of you have come across this error before and have any idea how to clear it? (see attached terminal.txt)

I have contacted ACE, but they do not support these 8TB drives as yet and cannot advise further.

Any help would be appreciated.

Many thanks

Steve.

I would suspect pcb is not native. Check SN!

pepe

Well,
Either what pepe sir says or heads could be replaced and tried ,No access to sa on platter imho

either both H0 and H1 are weak (definitely not dead) or pcb (rom) is not native.
Since there is a lower chance for the first option i vote for the 2nd.

pepe