Hi
need to transfer the ROM from G3959A USB to G3918A SATA
in G3959A which one is the ROM IC6 or IC2?
| Attachments: |
|
TOSHIBA-MQ03UBB300-G3959A-ET241-pcb.jpg [ 135.64 KiB | Viewed 14117 times ] |
| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| Toshiba G3959A ROM? http://forum.hddguru.com/viewtopic.php?f=11&t=38488 |
Page 1 of 1 |
| Author: | LostDataSa [ June 9th, 2019, 14:45 ] | ||
| Post subject: | Toshiba G3959A ROM? | ||
Hi need to transfer the ROM from G3959A USB to G3918A SATA in G3959A which one is the ROM IC6 or IC2?
|
|||
| Author: | digisupport [ June 9th, 2019, 14:54 ] |
| Post subject: | Re: Toshiba G3959A ROM? |
LostDataSa wrote: Hi need to transfer the ROM from G3959A USB to G3918A SATA in G3959A which one is the ROM IC6 or IC2? IC2 |
|
| Author: | anon* [ December 14th, 2020, 11:57 ] |
| Post subject: | Re: Toshiba G3959A ROM? |
Hi there, I know this thread is old. If it's better to open a new discussion, please let me know. I want to transfer the firmware/ROM/BIOS from a broken G3959A board to a new G3959A board. IC6 is a Wibond 25x20CL, which seems to be the one to be flashed. Has someone tried it? Thanks a lot! |
|
| Author: | fzabkar [ December 14th, 2020, 14:18 ] |
| Post subject: | Re: Toshiba G3959A ROM? |
IC2 is associated with the MCU, whereas IC6 is associated with the USB-SATA bridge. |
|
| Author: | anon* [ December 14th, 2020, 16:04 ] |
| Post subject: | Re: Toshiba G3959A ROM? |
Thanks for clarifying it, very useful! |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|