| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| No data access on a WD10JMVW-11AJGS2 (USB HDD) http://forum.hddguru.com/viewtopic.php?f=11&t=39035 |
Page 1 of 1 |
| Author: | Loutrage [ October 17th, 2019, 10:26 ] |
| Post subject: | No data access on a WD10JMVW-11AJGS2 (USB HDD) |
Hello, We try to obtain an access to the data on a hard drive WDC WD10JMVW-11AJGS2 with PC3000 connected in USB3 directly. In the Disk Management, Windows asks to intialize it. In PC3000, the hard drive is automatically detected as the FBLite 2.5" Family (in WD), here is the HDD ID info : Code: Model : WDC WD10JMVW-11AJGS2 Serial : WD-WX51AC308918 Firmware : 01.01A01 Capacity : 1 000 GB (1 953 459 633) We made a backup of the ROM/Module/SA tracks without error. We made a Scan and remap defects and here is the result : Code: Initial LBA............................. : 0 Final LBA............................... : 1 953 459 632 Test type............................... : Verify Error Code : 51AD....................... : Unknown error code: 51AD View module 90 information Total heads............................. : 4 Used heads.............................. : 4 Mdl 47 version.......................... : 1005jB05 ROM Version version..................... : 00160018 (16.18) Mdl 11 Version.......................... : 00160018 (16.18) Scan and remap defects Initial LBA............................. : 0 Final LBA............................... : 1 953 459 632 Test type............................... : Verify SAT command sending error: Illegal Request : Invalid Field in CDB Techno ON............................... : Ok We have these error : - Error Code : 51AD....................... : Unknown error code: 51AD - SAT command sending error: Illegal Request : Invalid Field in CDB When we try to open it with Data Extractor, we received this message Code: Operation aborted Catastrophic failure Error Read LBA: 0 What can we do ? Thank you ! |
|
| Author: | HaspHL [ October 17th, 2019, 19:53 ] |
| Post subject: | Re: No data access on a WD10JMVW-11AJGS2 (USB HDD) |
convert to SATA |
|
| Author: | pclab [ October 18th, 2019, 3:28 ] |
| Post subject: | Re: No data access on a WD10JMVW-11AJGS2 (USB HDD) |
HaspHL wrote: convert to SATA +1 |
|
| Author: | Loutrage [ October 18th, 2019, 4:59 ] |
| Post subject: | Re: No data access on a WD10JMVW-11AJGS2 (USB HDD) |
Thank you for the answers ! We will follow this guide https://blog.acelaboratory.com/pc-3000- ... drive.html So with a replacement of the PCB (and import of the info of the patient PCB), you think it should be works ? Do have you an idea what is the cause of the problem ? |
|
| Author: | MindMergepk [ October 18th, 2019, 11:54 ] |
| Post subject: | Re: No data access on a WD10JMVW-11AJGS2 (USB HDD) |
HaspHL wrote: convert to SATA +2 |
|
| Author: | northwind [ October 22nd, 2019, 5:19 ] |
| Post subject: | Re: No data access on a WD10JMVW-11AJGS2 (USB HDD) |
MindMergepk wrote: HaspHL wrote: convert to SATA +2 +3 Loutrage wrote: Do have you an idea what is the cause of the problem ? You cannot really diagnose a drive over USB (unless it's clicking etc). Convert to SATA and then see behavior. |
|
| Author: | Loutrage [ October 22nd, 2019, 8:45 ] | ||
| Post subject: | Re: No data access on a WD10JMVW-11AJGS2 (USB HDD) | ||
Hello ! Thank you for the answers. We succesfuly attach a SATA connector with soldering (see in attachment). After that, we had "ABR" error. We succeed to access to the data with a regeneration translator then a Clear SMART and a hard reset. After that, we can recover the data with Data Extractor !
|
|||
| Author: | pclab [ October 23rd, 2019, 8:56 ] |
| Post subject: | Re: No data access on a WD10JMVW-11AJGS2 (USB HDD) |
And why not getting a SATA PCB, Read ROM from patient PCB, write on donor PCB and that's it? A lot faster. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|