HDD GURU FORUMS
http://forum.hddguru.com/

scsı drives controler card
http://forum.hddguru.com/viewtopic.php?f=11&t=39094
Page 1 of 1

Author:  ctanis [ November 1st, 2019, 3:23 ]
Post subject:  scsı drives controler card

Hello,
I need help about SCSI drive, I have no experience about SCSI, If you have any experiance can you help me about which controler card, scsı cable and converter I need to buy, My drive model is st3146707lc.
I have tableau t4 scsı bridge but when I connect data cable drive stop spinning I dont anderstand cause of this behavior.
Can you help please. Also I have an adaptec card but I show same behavior when data cable connected.

Author:  bojack [ November 1st, 2019, 5:23 ]
Post subject:  Re: scsı drives controler card

I'm not sure tableau t4 supports 80 pins, but this device is already used for forensic image and should be work. If you're looking for a controller card, I suggest you look at it as HBA (Host Bus Adapter). you can easily find it quickly even in a search. like this (Adaptec 2248700-R U320 PCI Express X1 1-Channel SCSI Host Bus Adapter)

Author:  bojack [ November 1st, 2019, 5:26 ]
Post subject:  Re: scsı drives controler card

I was wondering, was the hdd running smoothly on any server before? Did the error while just receiving the image or clone?

Author:  fzabkar [ November 1st, 2019, 17:02 ]
Post subject:  Re: scsı drives controler card

Check the Delayed Start and Remote Start configuration settings.

https://www.seagate.com/files/staticfiles/support/disc/manuals/enterprise/cheetah/10K.7/SCSI/100260915d.pdf

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/