View topic - Loader WD10SDZW-11UMGS0

Main » Forums home » PC-3000 support forum

All times are UTC - 5 hours [ DST ]

Loader WD10SDZW-11UMGS0

Page 1 of 1

[ 9 posts ]

Print view

Previous topic | Next topic

Author

Message

Tamas

Post subject: Loader WD10SDZW-11UMGS0

Posted: February 11th, 2020, 11:31

Joined: February 11th, 2020, 11:26
Posts: 2
Location: Hungary

Hello,

Does anyone have the loader for a Palmer?

WD10SDZW-11UMGS0
ROM Modules:
ROM version............................. : 01.26N
ROM F/W version......................... : 00010026
Overlay F/W version..................... : 01.26N
Servo F/W version....................... : 01.2U

Thank you!

Top

pepe

Post subject: Re: Loader WD10SDZW-11UMGS0

Posted: February 11th, 2020, 20:31

Joined: October 3rd, 2005, 0:40
Posts: 4334
Location: Hungary

Hello Tamas,

i still don't have it, but welcome to the forum!
... and feel free to contact me if you run into pitfalls like building head map for it

pepe

_________________
Adatmentés - Data recovery

Top

Tamas

Post subject: Re: Loader WD10SDZW-11UMGS0

Posted: February 12th, 2020, 3:32

Joined: February 11th, 2020, 11:26
Posts: 2
Location: Hungary

Thanks Pepe! I'll contact for you!

Top

pclab

Post subject: Re: Loader WD10SDZW-11UMGS0

Posted: February 19th, 2020, 14:06

Joined: July 12th, 2010, 4:38
Posts: 1420
Location: Portugal

Also searching for a WD10SMZW-11Y0TS0

Techno mode key
Techno mode key......................... : Ok

RAM:
SA HDD has unknown capacity. SA CHS access may operates wrongly
HDD Info reading........................ : Ok
Heads number............................ : 2
Cyl Count............................... : 512

ROM:
Read ROM................................ : Ok
ROM Data size........................... : 1024 Kb
Flash ROM dir reading................... : Ok (Active)
Flash ROM dir reading (Ext)............. : Ok
Modules directory address............... : 159 117
SA regions address...................... : by default
Module 02 access........................ : Granted
SA Translator loading................... : Ok
SA defects assigned..................... : 2

ROM Modules:
ROM version............................. : 01.26N
ROM F/W version......................... : 00010026
Overlay F/W version..................... : 01.26N
Servo F/W version....................... : 01.2U

Heads configuration..................... : by map
Heads number............................ : 2
Heads number in use..................... : 2
Switched off heads...................... : No
Heads map............................... : 0,1

Thanks

_________________
http://www.pclab.com.pt facebook.com/PCLAB.A.T
ACELab partner

Top

pepe

Post subject: Re: Loader WD10SDZW-11UMGS0

Posted: February 20th, 2020, 12:25

Joined: October 3rd, 2005, 0:40
Posts: 4334
Location: Hungary

i am hoping to get resources from Tamas' drive soon. I will get back with the resutls...
pepe

_________________
Adatmentés - Data recovery

Top

pclab

Post subject: Re: Loader WD10SDZW-11UMGS0

Posted: February 21st, 2020, 7:14

Joined: July 12th, 2010, 4:38
Posts: 1420
Location: Portugal

pepe wrote:

i am hoping to get resources from Tamas' drive soon. I will get back with the resutls...
pepe

Thanks Pepe.

_________________
http://www.pclab.com.pt facebook.com/PCLAB.A.T
ACELab partner

Top

pepe

Post subject: Re: Loader WD10SDZW-11UMGS0

Posted: March 3rd, 2020, 11:14

Joined: October 3rd, 2005, 0:40
Posts: 4334
Location: Hungary

Here you go, i hope it helps.
pepe

Attachments:

01.26.zip [767.85 KiB]
Downloaded 599 times

_________________
Adatmentés - Data recovery

Top

MindMergepk

Post subject: Re: Loader WD10SDZW-11UMGS0

Posted: March 3rd, 2020, 13:59

Joined: December 8th, 2013, 4:48
Posts: 831
Location: Pakistan

pepe wrote:

Here you go, i hope it helps.
pepe

pepe, can you plz check LDR for this also ?

ROM Modules:
ROM version............................. : 02.1AP
ROM F/W version......................... : 0002000J
Overlay F/W version..................... : 02.1AP
Servo F/W version....................... : 01.3C

_________________
Data Recovery Pakistan

Top

pclab

Post subject: Re: Loader WD10SDZW-11UMGS0

Posted: March 3rd, 2020, 17:52

Joined: July 12th, 2010, 4:38
Posts: 1420
Location: Portugal

pepe wrote:

Here you go, i hope it helps.
pepe

Thank You

Will test it tomorrow.

_________________
http://www.pclab.com.pt facebook.com/PCLAB.A.T
ACELab partner

Top

Page 1 of 1

[ 9 posts ]

Main » Forums home » PC-3000 support forum

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 37 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum