Hello Tamas,
i still don't have it, but welcome to the forum!
... and feel free to contact me if you run into pitfalls like building head map for it
pepe
| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| Loader WD10SDZW-11UMGS0 http://forum.hddguru.com/viewtopic.php?f=11&t=39472 |
Page 1 of 1 |
| Author: | Tamas [ February 11th, 2020, 11:31 ] |
| Post subject: | Loader WD10SDZW-11UMGS0 |
Hello, Does anyone have the loader for a Palmer? WD10SDZW-11UMGS0 ROM Modules: ROM version............................. : 01.26N ROM F/W version......................... : 00010026 Overlay F/W version..................... : 01.26N Servo F/W version....................... : 01.2U Thank you! |
|
| Author: | pepe [ February 11th, 2020, 20:31 ] |
| Post subject: | Re: Loader WD10SDZW-11UMGS0 |
Hello Tamas, i still don't have it, but welcome to the forum! ... and feel free to contact me if you run into pitfalls like building head map for it pepe |
|
| Author: | Tamas [ February 12th, 2020, 3:32 ] |
| Post subject: | Re: Loader WD10SDZW-11UMGS0 |
Thanks Pepe! I'll contact for you! |
|
| Author: | pclab [ February 19th, 2020, 14:06 ] |
| Post subject: | Re: Loader WD10SDZW-11UMGS0 |
Also searching for a WD10SMZW-11Y0TS0 Techno mode key Techno mode key......................... : Ok RAM: SA HDD has unknown capacity. SA CHS access may operates wrongly HDD Info reading........................ : Ok Heads number............................ : 2 Cyl Count............................... : 512 ROM: Read ROM................................ : Ok ROM Data size........................... : 1024 Kb Flash ROM dir reading................... : Ok (Active) Flash ROM dir reading (Ext)............. : Ok Modules directory address............... : 159 117 SA regions address...................... : by default Module 02 access........................ : Granted SA Translator loading................... : Ok SA defects assigned..................... : 2 ROM Modules: ROM version............................. : 01.26N ROM F/W version......................... : 00010026 Overlay F/W version..................... : 01.26N Servo F/W version....................... : 01.2U Heads configuration..................... : by map Heads number............................ : 2 Heads number in use..................... : 2 Switched off heads...................... : No Heads map............................... : 0,1 Thanks |
|
| Author: | pepe [ February 20th, 2020, 12:25 ] |
| Post subject: | Re: Loader WD10SDZW-11UMGS0 |
i am hoping to get resources from Tamas' drive soon. I will get back with the resutls... pepe |
|
| Author: | pclab [ February 21st, 2020, 7:14 ] |
| Post subject: | Re: Loader WD10SDZW-11UMGS0 |
pepe wrote: i am hoping to get resources from Tamas' drive soon. I will get back with the resutls... pepe Thanks Pepe. |
|
| Author: | pepe [ March 3rd, 2020, 11:14 ] | ||
| Post subject: | Re: Loader WD10SDZW-11UMGS0 | ||
Here you go, i hope it helps. pepe
|
|||
| Author: | MindMergepk [ March 3rd, 2020, 13:59 ] |
| Post subject: | Re: Loader WD10SDZW-11UMGS0 |
pepe wrote: Here you go, i hope it helps. pepe pepe, can you plz check LDR for this also ? ROM Modules: ROM version............................. : 02.1AP ROM F/W version......................... : 0002000J Overlay F/W version..................... : 02.1AP Servo F/W version....................... : 01.3C |
|
| Author: | pclab [ March 3rd, 2020, 17:52 ] |
| Post subject: | Re: Loader WD10SDZW-11UMGS0 |
pepe wrote: Here you go, i hope it helps. pepe Thank You Will test it tomorrow. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|
