MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » PC-3000 support forum

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 
  Print view Previous topic | Next topic 
Author Message
Tamas
 Post subject: Loader WD10SDZW-11UMGS0
PostPosted: February 11th, 2020, 11:31 
Offline

Joined: February 11th, 2020, 11:26
Posts: 2
Location: Hungary
Hello,

Does anyone have the loader for a Palmer?

WD10SDZW-11UMGS0
ROM Modules:
ROM version............................. : 01.26N
ROM F/W version......................... : 00010026
Overlay F/W version..................... : 01.26N
Servo F/W version....................... : 01.2U

Thank you!
Top
 Profile  
 
pepe
 Post subject: Re: Loader WD10SDZW-11UMGS0
PostPosted: February 11th, 2020, 20:31 
Offline

Joined: October 3rd, 2005, 0:40
Posts: 4753
Location: Hungary
Hello Tamas,

i still don't have it, but welcome to the forum!
... and feel free to contact me if you run into pitfalls like building head map for it :)
pepe

_________________
Adatmentés - Data recovery
Top
 Profile  
 
Tamas
 Post subject: Re: Loader WD10SDZW-11UMGS0
PostPosted: February 12th, 2020, 3:32 
Offline

Joined: February 11th, 2020, 11:26
Posts: 2
Location: Hungary
Thanks Pepe! I'll contact for you!
Top
 Profile  
 
pclab
 Post subject: Re: Loader WD10SDZW-11UMGS0
PostPosted: February 19th, 2020, 14:06 
Offline
User avatar

Joined: July 12th, 2010, 4:38
Posts: 1451
Location: Portugal
Also searching for a WD10SMZW-11Y0TS0

Techno mode key
Techno mode key......................... : Ok

RAM:
SA HDD has unknown capacity. SA CHS access may operates wrongly
HDD Info reading........................ : Ok
Heads number............................ : 2
Cyl Count............................... : 512

ROM:
Read ROM................................ : Ok
ROM Data size........................... : 1024 Kb
Flash ROM dir reading................... : Ok (Active)
Flash ROM dir reading (Ext)............. : Ok
Modules directory address............... : 159 117
SA regions address...................... : by default
Module 02 access........................ : Granted
SA Translator loading................... : Ok
SA defects assigned..................... : 2

ROM Modules:
ROM version............................. : 01.26N
ROM F/W version......................... : 00010026
Overlay F/W version..................... : 01.26N
Servo F/W version....................... : 01.2U

Heads configuration..................... : by map
Heads number............................ : 2
Heads number in use..................... : 2
Switched off heads...................... : No
Heads map............................... : 0,1

Thanks

_________________
http://www.pclab.com.pt facebook.com/PCLAB.A.T
ACELab partner
Top
 Profile  
 
pepe
 Post subject: Re: Loader WD10SDZW-11UMGS0
PostPosted: February 20th, 2020, 12:25 
Offline

Joined: October 3rd, 2005, 0:40
Posts: 4753
Location: Hungary
i am hoping to get resources from Tamas' drive soon. I will get back with the resutls...
pepe

_________________
Adatmentés - Data recovery
Top
 Profile  
 
pclab
 Post subject: Re: Loader WD10SDZW-11UMGS0
PostPosted: February 21st, 2020, 7:14 
Offline
User avatar

Joined: July 12th, 2010, 4:38
Posts: 1451
Location: Portugal
pepe wrote:
i am hoping to get resources from Tamas' drive soon. I will get back with the resutls...
pepe


Thanks Pepe.

_________________
http://www.pclab.com.pt facebook.com/PCLAB.A.T
ACELab partner
Top
 Profile  
 
pepe
 Post subject: Re: Loader WD10SDZW-11UMGS0
PostPosted: March 3rd, 2020, 11:14 
Offline

Joined: October 3rd, 2005, 0:40
Posts: 4753
Location: Hungary
Here you go, i hope it helps.
pepe


Attachments:
01.26.zip [767.85 KiB]
Downloaded 871 times

_________________
Adatmentés - Data recovery
Top
 Profile  
 
MindMergepk
 Post subject: Re: Loader WD10SDZW-11UMGS0
PostPosted: March 3rd, 2020, 13:59 
Offline
User avatar

Joined: December 8th, 2013, 4:48
Posts: 838
Location: Pakistan
pepe wrote:
Here you go, i hope it helps.
pepe



pepe, can you plz check LDR for this also ?

ROM Modules:
ROM version............................. : 02.1AP
ROM F/W version......................... : 0002000J
Overlay F/W version..................... : 02.1AP
Servo F/W version....................... : 01.3C

_________________
Data Recovery Pakistan
Top
 Profile  
 
pclab
 Post subject: Re: Loader WD10SDZW-11UMGS0
PostPosted: March 3rd, 2020, 17:52 
Offline
User avatar

Joined: July 12th, 2010, 4:38
Posts: 1451
Location: Portugal
pepe wrote:
Here you go, i hope it helps.
pepe


Thank You

Will test it tomorrow.

_________________
http://www.pclab.com.pt facebook.com/PCLAB.A.T
ACELab partner
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 

Main » Forums home » PC-3000 support forum

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 6 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group