HDD GURU FORUMS

Hello dear community

I'm seeking for the ROM of a WD10SMZW-11Y0TS0 with S/N close to WXM1xxxxx

I have only two but they don't help also others

Additionally, have you tried to rebuild the ROM of these drives from SA?

Thank you

This is Palmer (USB)
Need an unlocked PCB end version ROM to select compatible.
No copies of adaptive modes ROM in SA. Difficult case if you lost your native ROM.

Hello I own three unlocked boards for it

Acelab in the ticket replied that it can be tried, but you need a compatible ROM

Corsari,
there is
05.66B_04.67
05.06B-03.65
05.06B_03.64
02.1AP_01.3C
06.06H_B1.3K
02.26P-B1.3K
03.48U_03.61
02.1AP_01.3C
which one to send?

Tomset,

hello thank you!

I don't know which could be the right one

Can you kindly zip them all? Ill send you a private message

This can turn in an interesting test

Thank you

Corsari,

This can turn in an interesting test

Rather, it will be an endless process. )
I will gather resources and lay out. Take some time.

thank you really much

so far I did noticed a weird data

I had some four ROMs collected here and in the palmers where I moved and saved the ROM

If you go to SA Regions the Dir address is 0 for both C0 and C1

while usually it is often a different offset and it varies from drive to drive

looks weird

Though the first impressions with now some ROMs tested

is that there is something that doesn't "return" in the situation

With every ROm the drive goes DRD DSC and DOESN'T clicks

but later no way to get SPT and following steps to try to access the SA

With every ROm the drive goes DRD DSC and DOESN'T clicks

so it should be until you pick up very close adaptive.
What about the native ROM?

Something went wrong moving it to the unlocked board

it arrived with missing board

Tomset wrote:Corsari,
there is
05.66B_04.67
05.06B-03.65
05.06B_03.64
02.1AP_01.3C
06.06H_B1.3K
02.26P-B1.3K
03.48U_03.61
02.1AP_01.3C
which one to send?

Hi Tomset,

Can you send me one version from your list?

ROM Modules:
ROM version............................. : 02.26P
ROM F/W version......................... : 0002000P
Overlay F/W version..................... : 02.26P
Servo F/W version....................... : B1.3K

Thank you.

I think Tomset is not with us anymore.
See the ROM attached.

Doomer wrote:I think Tomset is not with us anymore.

Sorry. I did not know.

Doomer wrote:See the ROM attached.

Thank you for the file.

This seems to be different ROM F/W version than mine.

ROM Modules:
ROM version............................. : 02.26P
ROM F/W version......................... : 0002000T
Overlay F/W version..................... : 02.26P
Servo F/W version....................... : B1.3K

I've seen only version of 2.26P
Not sure how important 0002000P would be for you tasks AFAIK this is a security FW version.

Doomer wrote:I think Tomset is not with us anymore.

What? What happened?

northwind wrote:

Doomer wrote:I think Tomset is not with us anymore.

What? What happened?

Cancer, from what I heard.

MasterT wrote:This seems to be different ROM F/W version than mine.

Found it

Doomer wrote:

northwind wrote:

Doomer wrote:I think Tomset is not with us anymore.

What? What happened?

Cancer, from what I heard.

Huh ,
Is he Well but sick or he is expired doomer ?

Amarbir[CDR-Labs] wrote: Is he Well but sick or he is expired doomer ?

He died on August 7th, 2022