| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| WD2.5 COM Port Issue http://forum.hddguru.com/viewtopic.php?f=11&t=40069 |
Page 1 of 1 |
| Author: | daRecoM [ June 24th, 2020, 6:16 ] |
| Post subject: | WD2.5 COM Port Issue |
Good day, I've been using this WD2.5 Com port to read ROM info from WD USB drive for years, and noticed the following error message since a couple of days ago. HDD Initialization... Check if COM-port selected correctly and port connection HDD Initialization...................... : Error Has anyone encountered this problem before? |
|
| Author: | pepe [ June 24th, 2020, 10:21 ] |
| Post subject: | Re: WD2.5 COM Port Issue |
Are you using Acelab serial adapters or some 3rd party? The error might be related to that. I have also noticed they lifted the communication speed to higher rates and it is hardcoded which i told them it would be good to make configurable. pepe |
|
| Author: | daRecoM [ June 28th, 2020, 22:09 ] |
| Post subject: | Re: WD2.5 COM Port Issue |
Hi Pepe, I'm using Acelab serial adapters. Thanks. |
|
| Author: | pepe [ June 30th, 2020, 17:48 ] |
| Post subject: | Re: WD2.5 COM Port Issue |
Does the terminal adapter work with other brands? |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|