HDD GURU FORUMS http://forum.hddguru.com/ |
|
After heads change drive spinning but not detection http://forum.hddguru.com/viewtopic.php?f=11&t=40183 |
Page 1 of 1 |
Author: | pepe [ July 21st, 2020, 10:03 ] |
Post subject: | Re: After heads change drive spinning but not detection |
Check SN in ROM... pepe |
Author: | Tawfeek [ July 22nd, 2020, 5:18 ] |
Post subject: | Re: After heads change drive spinning but not detection |
I think your donor is not match or some thing wrong happen while swapping . is your donor same Fw ,Model and pcb number ? |
Author: | pepe [ July 22nd, 2020, 7:27 ] |
Post subject: | Re: After heads change drive spinning but not detection |
It does not need to be same pcb number, and can be different model too, but there are some other factors that affect compatibility. We still don't know if ROM is native... |
Author: | Tawfeek [ July 22nd, 2020, 13:30 ] |
Post subject: | Re: After heads change drive spinning but not detection |
pepe wrote: We still don't know if ROM is native... yes , but i have question here about the the match donor in rosewood . i can't find certain role to match
|
Author: | pepe [ July 22nd, 2020, 15:21 ] |
Post subject: | Re: After heads change drive spinning but not detection |
They need some tuning occasionally. |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |