HDD GURU FORUMS http://forum.hddguru.com/ |
|
Need ROM 2AR20004 for Samsung/Seagate ST1000LM024 or Burn-in http://forum.hddguru.com/viewtopic.php?f=11&t=40306 |
Page 1 of 1 |
Author: | -BR- [ August 18th, 2020, 18:19 ] |
Post subject: | Need ROM 2AR20004 for Samsung/Seagate ST1000LM024 or Burn-in |
Hi there. Could someone please share ROM f/w: 2AR20004 from ST1000LM024? I know there are other methods and this is not the most recommended one, but this particular case original rom is lost, I could not access using burn-in (no compatible one available) and smart hot swap is not possible due to the lack of a proper donor. So I´d like to try some 2AR20004 ROMs to see if i get luck to match the proper OVERLAY If possible and not too much of a hassle, more than 1 ROM is welcome since they can be different even under the same 2AR20004 f/w version Thank you all in advance p.s Also would help any burn in resources for this particular model. The ones from Ace update box do not match any search criteria |
Author: | fzabkar [ August 18th, 2020, 18:31 ] |
Post subject: | Re: Need ROM 2AR20004 for Samsung/Seagate ST1000LM024 or Bur |
Can you show us the terminal log? That should tell us the RAM load points for the overlay components. Then you can locate these same load points in the FLASHTABL in the ROM. If the load points don't match, then you can eliminate that particular ROM candidate. Are you able to retrieve the overlay via terminal? |
Author: | -BR- [ August 18th, 2020, 18:50 ] |
Post subject: | Re: Need ROM 2AR20004 for Samsung/Seagate ST1000LM024 or Bur |
fzabkar wrote: Can you show us the terminal log? That should tell us the RAM load points for the overlay components. Then you can locate these same load points in the FLASHTABL in the ROM. If the load points don't match, then you can eliminate that particular ROM candidate. Terminal log, using pcb from same rom f/w from hdd label (original pcb lost by customer) ActiveFW : 00 FWVer : 0001 SATA PLL cal done DDR size detected = 16MB DDR size detected = 16MB *PAUNI_L2957*PA VID=0006 PN=0009 Rev=0002- PA_UNI Found *PAUNI_L2957*PA VID=0006 PN=0009 Rev=0002- PA_UNI FoundU S_0SO_1 SPU@30'C,5020mV IS=4 CLA ..36/64 HO..OK HO RPM=1648 OK AC 1111 ST..Skip..OK mS1 00000003 GT:421 SC(L):4106/45 BE.N:31 LD..OK SK C: 7194 H:0 Boot Sector Error! Loaded FIT ( 0: 0: 1) CalibTable Loaded. Rev:0x1B ResoTable Loaded. Rev:0x01 Bump Limit Loaded. Rev:0x01 RRO1xTable Loaded. Rev:0x01 Fw Active 00 | 115 | MOVLY001 | 1 | 0 | 10 | 1140 | Ovly loaded to 0x00014D00 Ovly NOT loaded fzabkar wrote: Are you able to retrieve the overlay via terminal? I was able to read all patient modules using dumb hot swap In this case, drive uses 73 MOVLY001 and 19 BOVLY001 |
Author: | fzabkar [ August 18th, 2020, 19:13 ] |
Post subject: | Re: Need ROM 2AR20004 for Samsung/Seagate ST1000LM024 or Bur |
Quote: Ovly loaded to 0x00014D00 This is the address that you should look for in the ROM FLASHTABL and in the MOVLY001 header. IIUC, there should be two RAM addresses for two MOVLY001 components. I can show where to find them, if need be. Just upload your MOVLY001 and ROM samples. http://www.hddoracle.com/viewtopic.php?f=59&t=698&p=2150#p2150 |
Author: | fzabkar [ August 18th, 2020, 20:05 ] |
Post subject: | Re: Need ROM 2AR20004 for Samsung/Seagate ST1000LM024 or Bur |
I would also confirm that your ROM candidate has a reference to your preamp "PAUNI_L2957", and that the FIPS section contains the same head map. I believe this is where the head map is located: http://www.hddoracle.com/viewtopic.php?f=84&t=1933&p=21661#p21661 |
Author: | -BR- [ August 18th, 2020, 20:06 ] |
Post subject: | Re: Need ROM 2AR20004 for Samsung/Seagate ST1000LM024 or Bur |
fzabkar wrote: Thank you for the link with the info! I hex edited donor ROM and patient MOVLY001 and they both use the same 0x014D00 address, so this case is probably a version compatibility that can not be eliminated by this parameter. Even if it could, my problem is exactly the oposite: I don't have any other ROMs with this f/w to use as donor ... So if anybody could spare the time, please share ROM(s) with f/w: 2AR20004 from ST1000LM024 On my side I would not mind trying them one by one until one works Thanks again. |
Author: | fzabkar [ August 18th, 2020, 20:15 ] |
Post subject: | Re: Need ROM 2AR20004 for Samsung/Seagate ST1000LM024 or Bur |
https://firmware.hddsurgery.com/dl.php?file=18687&filename=HN-M101MBB-2AR20004-S2WZJ90D233528.zip https://firmware.hddsurgery.com/index.php?manufacturer=Samsung&family=M8E FWIW, here are Samsung burn resources, but I don't know whether they include your model (probably not): http://files.hddguru.com/download/SHTR/Burn/ |
Author: | fzabkar [ August 18th, 2020, 20:43 ] |
Post subject: | Re: Need ROM 2AR20004 for Samsung/Seagate ST1000LM024 or Bur |
See https://forum.hddguru.com/viewtopic.php?t=28329 Code: Loaded FIT ( 0: 0: 1)
CalibTable Loaded. Rev:0x1B ResoTable Loaded. Rev:0x01 Bump Limit Loaded. Rev:0x01 RRO1xTable Loaded. Rev:0x01 Fw Active 00 Ovly loaded to 0x00014D00 <-- first component of MOVLY001 Ovly loaded to 0x1002E408 <-- second component of MOVLY001 FdtTable Loaded. Rev:0x02 Reading Serial Num Pass Up MC |
Author: | -BR- [ August 19th, 2020, 6:14 ] |
Post subject: | Re: Need ROM 2AR20004 for Samsung/Seagate ST1000LM024 or Bur |
fzabkar wrote: https://firmware.hddsurgery.com/dl.php?file=18687&filename=HN-M101MBB-2AR20004-S2WZJ90D233528.zip https://firmware.hddsurgery.com/index.php?manufacturer=Samsung&family=M8E I looked before but from model ST10000LM024 fw 2AR20004 Hddsurgery DB had only 1 entry with modules only - no ROM But I tried ajusting another donor ROM and made it compatible. From here I just ajusted patient SA to work with my donor pcb and everything worked. Saving customer data now. Thank you for the suggestion! |
Author: | einstein9 [ August 19th, 2020, 10:13 ] | ||
Post subject: | Re: Need ROM 2AR20004 for Samsung/Seagate ST1000LM024 or Bur | ||
[quote="-BR-"]Hi there. Could someone please share ROM f/w: 2AR20004 from ST1000LM024?
|
Author: | -BR- [ August 19th, 2020, 13:41 ] |
Post subject: | Re: Need ROM 2AR20004 for Samsung/Seagate ST1000LM024 or Bur |
Thank you for sharing einstein9! Case was already solved as I posted in last reply Anyway it is always nice to have some more ROMs, since there are only a few ones available with f/w 2AR20004 in the usual places. |
Author: | fzabkar [ August 19th, 2020, 15:46 ] |
Post subject: | Re: Need ROM 2AR20004 for Samsung/Seagate ST1000LM024 or Bur |
-BR- wrote: fzabkar wrote: But I tried ajusting another donor ROM and made it compatible. From here I just ajusted patient SA to work with my donor pcb and everything worked. I guess that means you wrote a donor MOVLY001 module to the SA? |
Author: | einstein9 [ August 22nd, 2020, 2:33 ] |
Post subject: | Re: Need ROM 2AR20004 for Samsung/Seagate ST1000LM024 or Bur |
-BR- wrote: Thank you for sharing einstein9! Case was already solved as I posted in last reply Anyway it is always nice to have some more ROMs, since there are only a few ones available with f/w 2AR20004 in the usual places. hehe, i did not notice.. good luck |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |