All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: Palmer resources 0002000J
PostPosted: June 30th, 2021, 3:23 
Offline
User avatar

Joined: July 12th, 2010, 4:38
Posts: 1418
Location: Portugal
Hey Guys
Does anyone have resources for a Palmer with ROM 0002000J ?
On HDDSurgery I found 2, but I get VSC Too Large error and they don't have a ROM to write...
Thanks

_________________
http://www.pclab.com.pt facebook.com/PCLAB.A.T
ACELab partner


Top
 Profile  
 
 Post subject: Re: Palmer resources 0002000J
PostPosted: August 2nd, 2021, 11:54 
Offline
User avatar

Joined: July 12th, 2010, 4:38
Posts: 1418
Location: Portugal
Hi

Going back to this case:

I can already have access to SA, but LBA is 0, I can't reach UA.

All modules are read OK. Any hints?


Attachments:
Palmer.png
Palmer.png [ 218.93 KiB | Viewed 13255 times ]

_________________
http://www.pclab.com.pt facebook.com/PCLAB.A.T
ACELab partner
Top
 Profile  
 
 Post subject: Re: Palmer resources 0002000J
PostPosted: October 30th, 2021, 17:10 
Offline
User avatar

Joined: March 15th, 2017, 10:25
Posts: 65
Location: Berlin
When all sectors are zero, than there seems to be an issue with smr translator.

What was the problem with this drive / what did you exactly do?!


Top
 Profile  
 
 Post subject: Re: Palmer resources 0002000J
PostPosted: October 30th, 2021, 21:37 
Offline
User avatar

Joined: April 3rd, 2011, 0:19
Posts: 2003
Location: Providence, RI
He didn't say the sectors were zero, he's saying that the max LBA was returned as 0 (which you can see from that picture).

What happens when you read modules by ID rather than by ABA? I've seen cases where they could read by ABA but not by ID.

_________________
Data Medics - Hard Drive, SSD, and RAID Data Recovery Service Company


Top
 Profile  
 
 Post subject: Re: Palmer resources 0002000J
PostPosted: October 30th, 2021, 22:46 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15463
Location: Australia
Does this mean that the drive is reporting a capacity of 1 LBA?

Code:
Capacity: 0 MB (1)

If so, is this normal for these types of firmware faults, or do faulty drives normally report 0 MB (0)?

_________________
A backup a day keeps DR away.


Top
 Profile  
 
 Post subject: Re: Palmer resources 0002000J
PostPosted: October 31st, 2021, 9:38 
Offline

Joined: October 21st, 2007, 8:48
Posts: 1631
What happens if you try to edit 02 ?


Top
 Profile  
 
 Post subject: Re: Palmer resources 0002000J
PostPosted: November 4th, 2021, 8:10 
Offline

Joined: June 26th, 2019, 8:55
Posts: 32
Location: Indore, India
pclab wrote:
I can already have access to SA, but LBA is 0, I can't reach UA.

All modules are read OK. Any hints?

Hii Everyone .

I am Also Facing Same Issue , at Start The Drive doesn't IDs itself.


1 Disable 411 Module .
2 Load LDR

After loading LDR, It IDs Perfectly and SA is also accessible (read/Write Working), But it Shows capacity 0 .

No User Data Access.


What is the issue here ?


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 23 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group