Rom Attached,
Thanks for you attention guys
| Attachments: |
ZC19S0S9.rar [431.18 KiB]
Downloaded 630 times |
| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| ST4000NM0035 http://forum.hddguru.com/viewtopic.php?f=11&t=41520 |
Page 1 of 2 |
| Author: | Popica [ July 27th, 2021, 3:49 ] |
| Post subject: | ST4000NM0035 |
i have this type of HDD, FW : TN003 on label and TN005 show in PC3000 tool, Model : ST4000NM0035-1V4107 Serial : ZC19TAMJ Firmware : TN05 Capacity : 4 TB (7 814 037 168) tried to unlocking into all ways but nothing work, i get this info after tech unlock code send : Rst0x80MAA006ATN05 (P)SATAReset NVCScramSavedHBSize:020A LD:MD_Alloc:00000050HB_Alloc:0000FlashRestorePowerDevReg7E:7005 PowerDevReg7D:0044MD_Saved:00000050HB_Saved:00000000MD_CRC:FF13 PP:MD_Alloc:0000C000HB_Alloc:0000FlashRestore PVTSize:00053C3C CompSize:00000ABA DeCompSize:00053C3CMD_Saved:00000ABAHB_Saved:00000000MD_CRC:8EAE TW:MD_Alloc:00000400HB_Alloc:002EFlashRestoreMD_Saved:00000148HB_Saved:00000000MD_CRC:0000 GC:MD_Alloc:00001000HB_Alloc:0000FlashRestoreMD_Saved:00000028HB_Saved:00000000MD_CRC:13B4 DSP0024 2Sync:0 4 ASCII Diag mode F3 T> HighPowerMode Status 0001 Req 0002 Overlay PartNum: 07061320 CFW PartNum: 04061443 Overlay CompileDate: 20160706 CFW CompileDate: 20180406 OverlayCompatibilityCheck failed Overlay PartNum: 07061320 CFW PartNum: 04061443 Overlay CompileDate: 20160706 CFW CompileDate: 20180406 OverlayCompatibilityCheck failed Unable to load Diag Cmd Processor Overlay i have any hope to can unlock it ? Thanks ! |
|
| Author: | ccc [ July 28th, 2021, 1:10 ] |
| Post subject: | Re: ST4000NM0035 |
The pcb or Rom content is not original....Probably someone changed the pcb. |
|
| Author: | Popica [ July 28th, 2021, 4:16 ] |
| Post subject: | Re: ST4000NM0035 |
its possible to be custom ROM , the pcb looks original bcause was inside into a Huawei Server, tryied to find a good version of ROM or something to can unlock it... or maybe any advice to change the FW to replace this customable firmware |
|
| Author: | ccc [ July 28th, 2021, 9:50 ] |
| Post subject: | Re: ST4000NM0035 |
Quote: Overlay PartNum: 07061320 CFW PartNum: 04061443 Overlay CompileDate: 20160706 CFW CompileDate: 20180406 OverlayCompatibilityCheck failed Overlay PartNum: 07061320 CFW PartNum: 04061443 Overlay CompileDate: 20160706 CFW CompileDate: 20180406 OverlayCompatibilityCheck failed This messages indicates that the installed ROM is not compatible with the overlays recorded to SA.You have to defeat this to be able to send commands in terminal. Rgds |
|
| Author: | Popica [ July 29th, 2021, 1:41 ] |
| Post subject: | Re: ST4000NM0035 |
got it mate, hope that i will find a solutions someday... to keep you close can you add skype : popa.gabriel.93 |
|
| Author: | pepe [ July 31st, 2021, 10:45 ] |
| Post subject: | Re: ST4000NM0035 |
CFW is not in rom, it is in the SA. Overlay is not compatible with the CFW actually loaded. However, it is possible that it can be solved by changing stuff in rom... can you post the txt produced by pc3k during rom reading? pepe |
|
| Author: | fzabkar [ July 31st, 2021, 15:55 ] |
| Post subject: | Re: ST4000NM0035 |
https://www.seagate.com/au/en/support/internal-hard-drives/enterprise-hard-drives/exos-7E/ Seagate's web site states that no firmware updates are available for the OP's serial number, so I'm wondering how the drive was upgraded from TN03 to TN05. FYI, here is a Dell DA05 update for this model (31 Mar. 2017): https://www.dell.com/support/home/en-au/drivers/driversdetails?driverid=w45c8 There is also a DA06 update (24 May 2017): https://www.dell.com/support/home/en-au/drivers/driversdetails?driverid=r100w |
|
| Author: | Popica [ August 19th, 2021, 5:26 ] |
| Post subject: | Re: ST4000NM0035 |
fzabkar wrote: https://www.seagate.com/au/en/support/internal-hard-drives/enterprise-hard-drives/exos-7E/ Seagate's web site states that no firmware updates are available for the OP's serial number, so I'm wondering how the drive was upgraded from TN03 to TN05. FYI, here is a Dell DA05 update for this model (31 Mar. 2017): https://www.dell.com/support/home/en-au/drivers/driversdetails?driverid=w45c8 There is also a DA06 update (24 May 2017): https://www.dell.com/support/home/en-au/drivers/driversdetails?driverid=r100w Those steps about firmware update are available only with a Dell system ? also already tried but no succes with a HP system and Seagate tools firmware update |
|
| Author: | Popica [ August 19th, 2021, 5:27 ] |
| Post subject: | Re: ST4000NM0035 |
pepe wrote: CFW is not in rom, it is in the SA. Overlay is not compatible with the CFW actually loaded. However, it is possible that it can be solved by changing stuff in rom... can you post the txt produced by pc3k during rom reading? pepe Here is it : Saving ROM to profile folder File : C:\Program Files (x86)\ACE Lab\PC-3000\Bin\!Profiles\SgF3\MakaraPlus\ST4000NM0035-1V4107-TN05-ZC19S0S9\Data\ROM\ROM_ZC19S0S9_03D642D3.bin Parsing container segment....... Flash ROM image Segment: GLOB_FLASH_DIR Parsing segment....... GLOB_FLASH_DIR End parsing segment... GLOB_FLASH_DIR Segment: BOOTFW_CONT_0 Parsing container segment....... BOOTFW_CONT_0 Segment: BOOTFW_DIR Parsing segment....... BOOTFW_DIR End parsing segment... BOOTFW_DIR Segment: GENERAL_DATA Parsing segment....... GENERAL_DATA End parsing segment... GENERAL_DATA Segment: PROG_INQ_DATA Parsing segment....... PROG_INQ_DATA End parsing segment... PROG_INQ_DATA Segment: BOOTFW Parsing segment....... BOOTFW End parsing segment... BOOTFW Segment: IAP Parsing segment....... IAP End parsing segment... IAP End parsing container segment... BOOTFW_CONT_0 Segment: SFW Parsing segment....... SFW End parsing segment... SFW Segment: SAP Parsing segment....... SAP End parsing segment... SAP Segment: GLOB_FLASH_DIR Parsing segment....... GLOB_FLASH_DIR End parsing segment... GLOB_FLASH_DIR Segment: BOOTFW_CONT_1 Parsing container segment....... BOOTFW_CONT_1 Segment: BOOTFW_DIR Parsing segment....... BOOTFW_DIR End parsing segment... BOOTFW_DIR Segment: GENERAL_DATA Parsing segment....... GENERAL_DATA End parsing segment... GENERAL_DATA Segment: PROG_INQ_DATA Parsing segment....... PROG_INQ_DATA End parsing segment... PROG_INQ_DATA Segment: BOOTFW Parsing segment....... BOOTFW End parsing segment... BOOTFW Segment: IAP Parsing segment....... IAP End parsing segment... IAP End parsing container segment... BOOTFW_CONT_1 Segment: SHELL Parsing segment....... SHELL End parsing segment... SHELL Segment: RAP Parsing segment....... RAP End parsing segment... RAP Segment: CAP Parsing segment....... CAP End parsing segment... CAP Segment: UDS_BFW Parsing segment....... UDS_BFW Segment: BOOTFLOADER Parsing segment....... BOOTFLOADER End parsing segment... BOOTFLOADER End parsing container segment... Flash ROM image Multipart flash image found. Reparsing... Parsing multipart flash image....... Flash ROM image Part 1... Parsing container segment....... Flash ROM part 1 Segment: GLOB_FLASH_DIR Parsing segment....... GLOB_FLASH_DIR End parsing segment... GLOB_FLASH_DIR Segment: BOOTFW_CONT_0 Parsing container segment....... BOOTFW_CONT_0 Segment: BOOTFW_DIR Parsing segment....... BOOTFW_DIR End parsing segment... BOOTFW_DIR Segment: GENERAL_DATA Parsing segment....... GENERAL_DATA End parsing segment... GENERAL_DATA Segment: PROG_INQ_DATA Parsing segment....... PROG_INQ_DATA End parsing segment... PROG_INQ_DATA Segment: BOOTFW Parsing segment....... BOOTFW End parsing segment... BOOTFW Segment: IAP Parsing segment....... IAP End parsing segment... IAP End parsing container segment... BOOTFW_CONT_0 Segment: SFW Parsing segment....... SFW End parsing segment... SFW Segment: SAP Parsing segment....... SAP End parsing segment... SAP Segment: GLOB_FLASH_DIR Parsing segment....... GLOB_FLASH_DIR End parsing segment... GLOB_FLASH_DIR Segment: BOOTFW_CONT_1 Parsing container segment....... BOOTFW_CONT_1 Segment: BOOTFW_DIR Parsing segment....... BOOTFW_DIR End parsing segment... BOOTFW_DIR Segment: GENERAL_DATA Parsing segment....... GENERAL_DATA End parsing segment... GENERAL_DATA Segment: PROG_INQ_DATA Parsing segment....... PROG_INQ_DATA End parsing segment... PROG_INQ_DATA Segment: BOOTFW Parsing segment....... BOOTFW End parsing segment... BOOTFW Segment: IAP Parsing segment....... IAP End parsing segment... IAP End parsing container segment... BOOTFW_CONT_1 Segment: SHELL Parsing segment....... SHELL End parsing segment... SHELL Segment: RAP Parsing segment....... RAP End parsing segment... RAP Segment: CAP Parsing segment....... CAP End parsing segment... CAP Segment: UDS_BFW Parsing segment....... UDS_BFW Segment: BOOTFLOADER Parsing segment....... BOOTFLOADER End parsing segment... BOOTFLOADER End parsing container segment... Flash ROM part 1 Part 2... Parsing container segment....... Flash ROM part 2 Empty container! End parsing container segment... Flash ROM part 2 |
|
| Author: | pepe [ August 24th, 2021, 10:59 ] |
| Post subject: | Re: ST4000NM0035 |
This log does not tell us much about the package version, are u using an old version of pc3k? i also checked a FW update of version TN05 and it was actually missing the ovls. I think that's how this situation happened, downloading such fw update leaves the original ovls intact, leaving us without compatible ones. There is a chance that orig CFW is in the SA, so in theory it could be read from there, but quite complicated without the compatible ovls. Trap 22. pepe |
|
| Author: | fzabkar [ August 24th, 2021, 17:55 ] |
| Post subject: | Re: ST4000NM0035 |
Can you upload the ROM dump? Maybe F3RomExplorer can extract the package version, etc. |
|
| Author: | Popica [ August 26th, 2021, 4:32 ] | ||
| Post subject: | Re: ST4000NM0035 | ||
Rom Attached, Thanks for you attention guys
|
|||
| Author: | Popica [ August 26th, 2021, 5:52 ] | ||
| Post subject: | Re: ST4000NM0035 | ||
fzabkar wrote: Can you upload the ROM dump? Maybe F3RomExplorer can extract the package version, etc. Rom Attached, Thanks for you attention!
|
|||
| Author: | Popica [ August 26th, 2021, 5:54 ] |
| Post subject: | Re: ST4000NM0035 |
pepe wrote: This log does not tell us much about the package version, are u using an old version of pc3k? i also checked a FW update of version TN05 and it was actually missing the ovls. I think that's how this situation happened, downloading such fw update leaves the original ovls intact, leaving us without compatible ones. There is a chance that orig CFW is in the SA, so in theory it could be read from there, but quite complicated without the compatible ovls. Trap 22. pepe my last version is 6.9.16 Hope that i will find a solution on them |
|
| Author: | E123 [ August 26th, 2021, 6:16 ] |
| Post subject: | Re: ST4000NM0035 |
Try this ROM. It must return drive to TN03. https://disk.yandex.ru/d/1rstD6H126Fsew |
|
| Author: | Popica [ August 26th, 2021, 8:18 ] |
| Post subject: | Re: ST4000NM0035 |
E123 wrote: Try this ROM. It must return drive to TN03. https://disk.yandex.ru/d/1rstD6H126Fsew full write this one or i need to import SAP/CAP etc ? thanks for you time |
|
| Author: | E123 [ August 26th, 2021, 8:59 ] |
| Post subject: | Re: ST4000NM0035 |
Write this file "as it is". It's your "patched" rom. |
|
| Author: | pepe [ August 26th, 2021, 9:10 ] |
| Post subject: | Re: ST4000NM0035 |
i doubt it would do any good, as the CFW is not compatible with the OVLs in the SA. pepe |
|
| Author: | Popica [ August 26th, 2021, 9:13 ] |
| Post subject: | Re: ST4000NM0035 |
E123 wrote: Write this file "as it is". It's your "patched" rom. Awesome, and if it work ( i will test it in 2h ) can i succed to do all ? 30 pcs..... Thanks for your time |
|
| Author: | fzabkar [ August 26th, 2021, 16:00 ] |
| Post subject: | Re: ST4000NM0035 |
pepe wrote: i doubt it would do any good, as the CFW is not compatible with the OVLs in the SA. Did you check it? AIUI, this firmware keeps a backup copy in a container. The ROM has two "csiD" containers -- one has the original TN03 firmware components while the other has TN05. @E123 has merely reverted to the original container. |
|
| Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|