All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: Hitachi pcb changed
PostPosted: June 1st, 2022, 9:16 
Offline

Joined: August 26th, 2021, 17:52
Posts: 61
Location: Brasil
I receive a hitachi hdd the model is HTS545050A7E362 and the pcb is changed, with the pc3k i read the rom serial number and is not the same serial number as the label, I don't have much experience with this brand, the client already went to 2 mac technical services and in the last place they changed the disk from the laptop, I even believe the technical service give my client a brick. And I don't believe the client can recover the original pcb.

I want to know if it is possible to rebuild the rom from the firmware like in WD? or do some sort of hot swap? I I know the last method is not very possible. When I search in the blog all similar questions the answer is no, I only ask if there exist some exception.

Thanks to all to read my post
My best regards


Top
 Profile  
 
 Post subject: Re: Hitachi pcb changed
PostPosted: June 1st, 2022, 13:04 
Offline
User avatar

Joined: August 15th, 2006, 3:01
Posts: 3464
Location: CDRLabs @ Chandigarh [ India ]
jtb1982 wrote:
I receive a hitachi hdd the model is HTS545050A7E362 and the pcb is changed, with the pc3k i read the rom serial number and is not the same serial number as the label, I don't have much experience with this brand, the client already went to 2 mac technical services and in the last place they changed the disk from the laptop, I even believe the technical service give my client a brick. And I don't believe the client can recover the original pcb.

I want to know if it is possible to rebuild the rom from the firmware like in WD? or do some sort of hot swap? I I know the last method is not very possible. When I search in the blog all similar questions the answer is no, I only ask if there exist some exception.

Thanks to all to read my post
My best regards


Hello ,
Please Share The ROM and Top Label of The HDD

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com


Top
 Profile  
 
 Post subject: Re: Hitachi pcb changed
PostPosted: June 2nd, 2022, 18:10 
Offline

Joined: October 3rd, 2005, 0:40
Posts: 4311
Location: Hungary
SN is byte swapped, take it into account.
If it still doesn't match, you either have to have the client to get orig pcb or i can help with recovering the nvram and the data from the drive.

pepe

_________________
Adatmentés - Data recovery


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 12 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group