HDD GURU FORUMS
http://forum.hddguru.com/

WD10JPVX-00JC3T0 FBLite rom regeneration
http://forum.hddguru.com/viewtopic.php?f=11&t=42561		 Page 1 of 1
Author:  jtb1982 [ July 5th, 2022, 14:03 ]
Post subject:  WD10JPVX-00JC3T0 FBLite rom regeneration
Hello to everyone

The last week in my job we received a WD10JPVX-00JC3T0 with the pcb changed. We talked with the acelab technical support and they told us the FBLite firmware is very complex and for the moment it's not possible to rebuild the rom with the firmware. Despite what acelab told me, has anyone achieved a rom regeneration in this family.

thanks very much and my best regards

Attachments:
IMG_6985.jpg
IMG_6985.jpg [ 1.97 MiB | Viewed 8347 times ]
IMG_6984.jpg
IMG_6984.jpg [ 2.02 MiB | Viewed 8347 times ]
Author:  fzabkar [ July 5th, 2022, 15:04 ]
Post subject:  Re: WD10JPVX-00JC3T0 FBLite rom regeneration
Is this one of those models where ROM module 0x4F is "unique"?

https://forum.hddguru.com/viewtopic.php?f=24&t=37795

I was told (via PM) that if you disturb the adaptive parameters for head #0 on a working drive by as little as 2 points, the SA becomes inaccessible. This suggests that the adaptives are very sensitive. I haven't tried this for myself, though.
Author:  Doomer [ July 5th, 2022, 15:17 ]
Post subject:  Re: WD10JPVX-00JC3T0 FBLite rom regeneration
Quote:
Despite what acelab told me, has anyone achieved a rom regeneration in this family.

Yes, it is possible in many cases.
I could do it, pepe can do it even better than myself.
Author:  jtb1982 [ July 8th, 2022, 15:28 ]
Post subject:  Re: WD10JPVX-00JC3T0 FBLite rom regeneration
fzabkar wrote:
Is this one of those models where ROM module 0x4F is "unique"?

https://forum.hddguru.com/viewtopic.php?f=24&t=37795

I was told (via PM) that if you disturb the adaptive parameters for head #0 on a working drive by as little as 2 points, the SA becomes inaccessible. This suggests that the adaptives are very sensitive. I haven't tried this for myself, though.



Hello Fzabkar Thanks very much to answer
Author:  jtb1982 [ July 8th, 2022, 15:32 ]
Post subject:  Re: WD10JPVX-00JC3T0 FBLite rom regeneration
Doomer wrote:
Quote:
Despite what acelab told me, has anyone achieved a rom regeneration in this family.

Yes, it is possible in many cases.
I could do it, pepe can do it even better than myself.



Hello Doomer thanks very much to answer me!!!

If you are interested, send a private message telling me how much you charge me to do it and your conditions.

Pepe is from Hungary?
Author:  pepe [ July 8th, 2022, 19:07 ]
Post subject:  Re: WD10JPVX-00JC3T0 FBLite rom regeneration
Hello,

yes, i am in Hungary, can probably recover it, depending on surface conditions that may affect success rate.
Author:  sin [ July 23rd, 2022, 12:22 ]
Post subject:  Re: WD10JPVX-00JC3T0 FBLite rom regeneration
I can do it too :-)
Certainly, i have not made my attempts for a drive which was pre-opened.

Thanks Fzabkar for referring to my post that was written long ago!

Good Luck.
--
Author:  fzabkar [ July 23rd, 2022, 17:32 ]
Post subject:  Re: WD10JPVX-00JC3T0 FBLite rom regeneration
sin wrote:
I can do it too :-)--

Just curious ... How many attempts does it take before you gain access to the SA?
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/