All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 20 posts ] 
Author Message
 Post subject: WD10SPZX-60Z10T0 FW 04.01AD4 DOM 22 JAN 2021 SED recovery
PostPosted: July 5th, 2022, 22:59 
Offline

Joined: November 23rd, 2010, 13:32
Posts: 461
Location: brisbane
I have got this WD10SPZX-60Z10T0 SED drive.
Its showing SED drive locked everywhere.
I have updated UDMA having support for decryption without unlocked pcb. However this is my first decryption case.
How can I go ahead.


Top
 Profile  
 
 Post subject: Re: WD10SPZX-60Z10T0 FW 04.01AD4 DOM 22 JAN 2021 SED reco
PostPosted: July 6th, 2022, 1:18 
Offline
User avatar

Joined: January 9th, 2007, 11:12
Posts: 390
Location: Romania
Read Rom with programmer, unlock, write Rom back and you will have SA access.

_________________
www.datasave.ro


Top
 Profile  
 
 Post subject: Re: WD10SPZX-60Z10T0 FW 04.01AD4 DOM 22 JAN 2021 SED reco
PostPosted: July 6th, 2022, 5:39 
Offline

Joined: November 7th, 2020, 5:31
Posts: 1084
Location: The_UK
Tim put a tutorial up on his youtube channel https://www.youtube.com/watch?v=G0B3fwn5VmY

_________________
Data Recovery Services in the UK.
https://www.usbrecovery.co.uk/


Top
 Profile  
 
 Post subject: Re: WD10SPZX-60Z10T0 FW 04.01AD4 DOM 22 JAN 2021 SED reco
PostPosted: July 6th, 2022, 8:07 
Offline
User avatar

Joined: January 28th, 2009, 10:54
Posts: 3452
Location: Greece
https://youtu.be/znNgJkqJYrw?t=550

_________________
http://www.northwind.gr
SandForce SSD Recovery
Ransomware Reverse Engineering - NoMoreRansom! partners


Top
 Profile  
 
 Post subject: Re: WD10SPZX-60Z10T0 FW 04.01AD4 DOM 22 JAN 2021 SED reco
PostPosted: July 6th, 2022, 10:25 
Offline

Joined: November 23rd, 2010, 13:32
Posts: 461
Location: brisbane
northwind wrote:
https://youtu.be/znNgJkqJYrw?t=550


Thanks a lot northwind , Lardman & CCC for all the help.
I am sure with all this information and your help , I will succeed in this recovery.
Main challenge for me now is to read Rom carefully from this 2.5" SATA hard disk.
I have brought Revelprog IS with POMONA clips couple of years back but not been able to read a single rom :(
I am not sure about connection to clips. Though this is advanced programmer sound knowledge of chips ,there voltage is must which I am lacking.
I have tried to read rom from desktop pcb's but each time programmer give overvoltage alert. File which was read was different than rom read using pc3000.
I have also found chip no. and family selection is revelprog is not matching, So I have given up chip reading altogether.
Somehow I will manage to read rom from one of my expert friend , hope further process will not be so hard.
Thanks again.


Attachments:
Screenshot 2022-07-06 071952.png
Screenshot 2022-07-06 071952.png [ 54.01 KiB | Viewed 11124 times ]
WhatsApp Image 2022-07-06 at 7.15.13 AM (1).jpeg
WhatsApp Image 2022-07-06 at 7.15.13 AM (1).jpeg [ 116.35 KiB | Viewed 11124 times ]
WhatsApp Image 2022-07-06 at 7.15.13 AM.jpeg
WhatsApp Image 2022-07-06 at 7.15.13 AM.jpeg [ 124.87 KiB | Viewed 11124 times ]
3.jpg
3.jpg [ 85.28 KiB | Viewed 11124 times ]
1.jpg
1.jpg [ 68.12 KiB | Viewed 11124 times ]
2.jpg
2.jpg [ 68.81 KiB | Viewed 11124 times ]
Top
 Profile  
 
 Post subject: Re: WD10SPZX-60Z10T0 FW 04.01AD4 DOM 22 JAN 2021 SED reco
PostPosted: July 6th, 2022, 10:39 
Offline
User avatar

Joined: March 6th, 2010, 3:46
Posts: 601
Location: Kolding | Denmark
Have been using Revelprog IS for reading ROMs on all types of drives, read / write directly from ROM on pcb.
Select the correct chip, read or write, never failed. I use the ZIF connector, never tried ICSP connector.

_________________
Digitalsupport Data Recovery
https://digitalsupport.dk


Top
 Profile  
 
 Post subject: Re: WD10SPZX-60Z10T0 FW 04.01AD4 DOM 22 JAN 2021 SED reco
PostPosted: July 6th, 2022, 11:32 
Offline

Joined: September 29th, 2005, 4:10
Posts: 402
Location: Moscow
25Q80EW on 1,8V
there are those who can read crookedly at low speeds, and some at no


Top
 Profile  
 
 Post subject: Re: WD10SPZX-60Z10T0 FW 04.01AD4 DOM 22 JAN 2021 SED reco
PostPosted: July 6th, 2022, 15:14 
Offline

Joined: November 7th, 2020, 5:31
Posts: 1084
Location: The_UK
Forget the clip - just take the chip off and put in the socket.

I wasn't overly impressed with the revelprog software or the way to select chips (it expects you to know what you're doing :lol: ) I suspect a great deal of my frustration was because I was used to just pressing ID and then read in Colibri.

_________________
Data Recovery Services in the UK.
https://www.usbrecovery.co.uk/


Top
 Profile  
 
 Post subject: Re: WD10SPZX-60Z10T0 FW 04.01AD4 DOM 22 JAN 2021 SED reco
PostPosted: July 6th, 2022, 18:38 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15461
Location: Australia
If you're reading devices in-circuit, then you need some manual control over the voltage. You're 2.5V device may be able to handle 3.3V, but other chips on the same supply rail may not like it.

_________________
A backup a day keeps DR away.


Top
 Profile  
 
 Post subject: Re: WD10SPZX-60Z10T0 FW 04.01AD4 DOM 22 JAN 2021 SED reco
PostPosted: July 7th, 2022, 5:16 
Offline

Joined: November 23rd, 2010, 13:32
Posts: 461
Location: brisbane
Thank You so much all of you.
With your expert help ,I have successfully decrypted hard disk and recovered data.


Top
 Profile  
 
 Post subject: Re: WD10SPZX-60Z10T0 FW 04.01AD4 DOM 22 JAN 2021 SED reco
PostPosted: July 7th, 2022, 17:08 
Offline

Joined: August 18th, 2010, 17:35
Posts: 3636
Location: Massachusetts, USA
Cool.
The Ponoma clips don't work well.
The Pogo adapter is a little better.

_________________
Hard Disk Drive, SSD, USB Drive and RAID Data Recovery Specialist in Massachusetts


Top
 Profile  
 
 Post subject: Re: WD10SPZX-60Z10T0 FW 04.01AD4 DOM 22 JAN 2021 SED reco
PostPosted: July 8th, 2022, 4:45 
Offline

Joined: September 1st, 2012, 6:16
Posts: 182
Location: Universe
labtech wrote:
Cool.
The Ponoma clips don't work well.
The Pogo adapter is a little better.


I have same experience. Each time I get different reading. I have heard about POGO , Is it worth to try ?
Actually I want to read rom in circuit in order to avoid chip damage in desoldering and for some on site cases.
Somehow it did not work.


Top
 Profile  
 
 Post subject: Re: WD10SPZX-60Z10T0 FW 04.01AD4 DOM 22 JAN 2021 SED reco
PostPosted: July 9th, 2022, 0:13 
Offline

Joined: September 1st, 2012, 6:16
Posts: 182
Location: Universe
I want to know disadvantages and risks in using SED drives / SED SSD's from end customers perspective.

I have suggested Samsung 870EVO and Crucial MX500 to a customer for backup ( though they are consumer grade SSD's)
As I can see in crucial MX500 SED is written that means SED function is implemented in this model.
I just want to know what are risks involved in using SED SSD's ?
I have educated customer not to use inferior SMR drives for this purpose . Enterprise / Industrial SSD's are not readily available and are costlier too.
SAMSUNG 870EVO is having TBW of 2400TB and is is having 5 year warranty .Its only SSD having SLC cache.
Crucial might not be as rugged as samsung. I have read that it is having write amplification also.
Experts pls. comment.


Top
 Profile  
 
 Post subject: Re: WD10SPZX-60Z10T0 FW 04.01AD4 DOM 22 JAN 2021 SED reco
PostPosted: July 18th, 2022, 9:47 
Offline

Joined: August 18th, 2010, 17:35
Posts: 3636
Location: Massachusetts, USA
higgsboson wrote:
labtech wrote:
Cool.
The Ponoma clips don't work well.
The Pogo adapter is a little better.


I have same experience. Each time I get different reading. I have heard about POGO , Is it worth to try ?
Actually I want to read rom in circuit in order to avoid chip damage in desoldering and for some on site cases.
Somehow it did not work.

If you could squint looking at how the pins grabs the chip, you will see that the Ponoma does not really grab the pins well, or at all.
Pogo works better, but still has issues sometimes.

_________________
Hard Disk Drive, SSD, USB Drive and RAID Data Recovery Specialist in Massachusetts


Top
 Profile  
 
 Post subject: Re: WD10SPZX-60Z10T0 FW 04.01AD4 DOM 22 JAN 2021 SED reco
PostPosted: August 30th, 2022, 12:45 
Offline

Joined: October 5th, 2015, 18:53
Posts: 478
Location: US
Tomset wrote:
25Q80EW on 1,8V
there are those who can read crookedly at low speeds, and some at no

It is last message on this forum from Tomset. Unfortunately he died Aug 7. He was really one of kind! It is very sad. RIP :(


Top
 Profile  
 
 Post subject: Re: WD10SPZX-60Z10T0 FW 04.01AD4 DOM 22 JAN 2021 SED reco
PostPosted: August 30th, 2022, 13:03 
Offline
User avatar

Joined: June 11th, 2013, 17:01
Posts: 1710
Location: Phoenix, AZ USA
drHDD wrote:
Tomset wrote:
25Q80EW on 1,8V
there are those who can read crookedly at low speeds, and some at no

It is last message on this forum from Tomset. Unfortunately he died Aug 7. He was really one of kind! It is very sad. RIP :(

Sorry to hear that. What happened?

_________________
HDD, SSD, Flash and RAID Data Recovery
Founder of The Data Recovery Professionals Group


Top
 Profile  
 
 Post subject: Re: WD10SPZX-60Z10T0 FW 04.01AD4 DOM 22 JAN 2021 SED reco
PostPosted: August 30th, 2022, 13:09 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15461
Location: Australia
higgsboson wrote:
I have suggested Samsung 870EVO ... to a customer for backup ...

Notes: SSD+RAID Recovery – Samsung 870 EVO Not To Be Trusted!:
https://goughlui.com/2022/08/20/notes-ssdraid-recovery-samsung-870-evo-not-to-be-trusted/

_________________
A backup a day keeps DR away.


Top
 Profile  
 
 Post subject: Re: WD10SPZX-60Z10T0 FW 04.01AD4 DOM 22 JAN 2021 SED reco
PostPosted: August 31st, 2022, 14:34 
Offline

Joined: October 5th, 2015, 18:53
Posts: 478
Location: US
ddrecovery wrote:
drHDD wrote:
Tomset wrote:
25Q80EW on 1,8V
there are those who can read crookedly at low speeds, and some at no

It is last message on this forum from Tomset. Unfortunately he died Aug 7. He was really one of kind! It is very sad. RIP :(

Sorry to hear that. What happened?

I know he died on hospital but I don't know why and what happened.


Top
 Profile  
 
 Post subject: Re: WD10SPZX-60Z10T0 FW 04.01AD4 DOM 22 JAN 2021 SED reco
PostPosted: August 31st, 2022, 17:21 
Offline

Joined: October 3rd, 2005, 0:40
Posts: 4311
Location: Hungary
Very bad news, sorry to hear though i didn't know him very much. Friends stop for a moment, then the world goes on - without us...
Do you know how old he was?

pepe

_________________
Adatmentés - Data recovery


Top
 Profile  
 
 Post subject: Re: WD10SPZX-60Z10T0 FW 04.01AD4 DOM 22 JAN 2021 SED reco
PostPosted: August 31st, 2022, 19:57 
Offline

Joined: October 5th, 2015, 18:53
Posts: 478
Location: US
pepe wrote:
Very bad news, sorry to hear though i didn't know him very much. Friends stop for a moment, then the world goes on - without us...
Do you know how old he was?

pepe

He was around 60-65 years old.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 20 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 16 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group