SpyGlass2 2.5 Firmware corruption

[CrazyDoctor]

Hi Everyone

Please help me.
I got the following drive:
Model : WDC WD50NDZW-11MR8S1
Serial : WD-WX62D51EFKXD
Firmware : 02.01A02
Capacity : 5 TB (9 767 475 632)

I converted the USB only to SATA.
The drive give full recognize and full SA access but doesn't give any sector access.
The firmware is corrupted.
Since the drive is SpyGlass I am afraid to do any translator regeneration or anything else.

I found that 190 module is corrupted or can't be read normally.
Besides of that module all the other modules are ok.

| 0190 | 0 | Ad | 411 924 | 208 488 | No | | | | | Second level translator |
| 0190 | 1 | Ad | 411 924 | 208 488 | No | | | | | Second level translator


Any way to deal with the drive?
I only need to read the file list. That's all.

I attached the report from PC3000

What should I do next?

Best Regards

[pclab]

If 190 is bad, I think your best option is read in PBA and do a RAW recovery

[CrazyDoctor]

If 190 is bad, I think your best option is read in PBA and do a RAW recovery

Hi

How do I read with PBA?
I rarly used that option and don't remember..

[pepe]

it all depends on how exactly 190 is bad. pls send me 183 and 190 for analysis.

pepe

[CrazyDoctor]

it all depends on how exactly 190 is bad. pls send me 183 and 190 for analysis.

pepe

Hi Pepe

I uploaded the files to this link
190.rpm amd 183.rpm

https://www.filemail.com/d/fgwlkspumahjsin

Best Regards,

[pepe]

Hello, it is in pretty bad shape, can you back up regions and tracks? Both copies.
then upload it but compressed, not like the prev one

[CrazyDoctor]

Hello, it is in pretty bad shape, can you back up regions and tracks? Both copies.
then upload it but compressed, not like the prev one

When tring to read the tracks I get those error messages:

Physical read error C/H/S: -384/0/66 (1) Device Error Detected: "DM SECTOR OUT OF RANGE"
Physical read error C/H/S: -384/0/67 (1) Device Error Detected: "DM SECTOR OUT OF RANGE"
Physical read error C/H/S: -384/0/68 (1) Device Error Detected: "DM SECTOR OUT OF RANGE"


For the Regions how do I backup those?
Since I can only back up ROM, Modules, SA Tracks, RAM

Best Regards,

[Amarbir[CDR-Labs]]

Hello, it is in pretty bad shape, can you back up regions and tracks? Both copies.
then upload it but compressed, not like the prev one

When tring to read the tracks I get those error messages:

Physical read error C/H/S: -384/0/66 (1) Device Error Detected: "DM SECTOR OUT OF RANGE"
Physical read error C/H/S: -384/0/67 (1) Device Error Detected: "DM SECTOR OUT OF RANGE"
Physical read error C/H/S: -384/0/68 (1) Device Error Detected: "DM SECTOR OUT OF RANGE"


For the Regions how do I backup those?
Since I can only back up ROM, Modules, SA Tracks, RAM

Best Regards,

Hi ,
Backup Copy 0 Side Platter 00 Side Only

[Mikippp]

Hi,
Ctrl + Alt + 3
Open module 35
Open SA Defect list (edit in memory)
See which cylinders are turned off
Deselect disabled Tracks (Cylinders) when copying

Mikippp

[CrazyDoctor]

Hello, it is in pretty bad shape, can you back up regions and tracks? Both copies.
then upload it but compressed, not like the prev one

Hi Pepe

Plaese check the The regions and the tracks here

https://www.filemail.com/d/undqdlqyaxgxpbe

Best Regards,

[pepe]

Hello,
it seems to be a big mess, gonna take some time to find out if anything can be done...

pepe