HDD GURU FORUMS http://forum.hddguru.com/ |
|
SpyGlass2 2.5 Firmware corruption http://forum.hddguru.com/viewtopic.php?f=11&t=42622 |
Page 1 of 1 |
Author: | CrazyDoctor [ August 2nd, 2022, 22:07 ] |
Post subject: | SpyGlass2 2.5 Firmware corruption |
Hi Everyone Please help me. I got the following drive: Model : WDC WD50NDZW-11MR8S1 Serial : WD-WX62D51EFKXD Firmware : 02.01A02 Capacity : 5 TB (9 767 475 632) I converted the USB only to SATA. The drive give full recognize and full SA access but doesn't give any sector access. The firmware is corrupted. Since the drive is SpyGlass I am afraid to do any translator regeneration or anything else. I found that 190 module is corrupted or can't be read normally. Besides of that module all the other modules are ok. | 0190 | 0 | Ad | 411 924 | 208 488 | No | | | | | Second level translator | | 0190 | 1 | Ad | 411 924 | 208 488 | No | | | | | Second level translator Any way to deal with the drive? I only need to read the file list. That's all. I attached the report from PC3000 What should I do next? Best Regards |
Author: | pclab [ August 3rd, 2022, 9:17 ] |
Post subject: | Re: SpyGlass2 2.5 Firmware corruption |
If 190 is bad, I think your best option is read in PBA and do a RAW recovery |
Author: | CrazyDoctor [ August 3rd, 2022, 10:05 ] |
Post subject: | Re: SpyGlass2 2.5 Firmware corruption |
pclab wrote: If 190 is bad, I think your best option is read in PBA and do a RAW recovery Hi How do I read with PBA? I rarly used that option and don't remember.. |
Author: | pepe [ August 3rd, 2022, 12:00 ] |
Post subject: | Re: SpyGlass2 2.5 Firmware corruption |
it all depends on how exactly 190 is bad. pls send me 183 and 190 for analysis. pepe |
Author: | CrazyDoctor [ August 4th, 2022, 11:06 ] |
Post subject: | Re: SpyGlass2 2.5 Firmware corruption |
pepe wrote: it all depends on how exactly 190 is bad. pls send me 183 and 190 for analysis. pepe Hi Pepe I uploaded the files to this link 190.rpm amd 183.rpm https://www.filemail.com/d/fgwlkspumahjsin Best Regards, |
Author: | pepe [ August 4th, 2022, 15:15 ] |
Post subject: | Re: SpyGlass2 2.5 Firmware corruption |
Hello, it is in pretty bad shape, can you back up regions and tracks? Both copies. then upload it but compressed, not like the prev one |
Author: | CrazyDoctor [ August 5th, 2022, 0:18 ] |
Post subject: | Re: SpyGlass2 2.5 Firmware corruption |
pepe wrote: Hello, it is in pretty bad shape, can you back up regions and tracks? Both copies. then upload it but compressed, not like the prev one When tring to read the tracks I get those error messages: Physical read error C/H/S: -384/0/66 (1) Device Error Detected: "DM SECTOR OUT OF RANGE" Physical read error C/H/S: -384/0/67 (1) Device Error Detected: "DM SECTOR OUT OF RANGE" Physical read error C/H/S: -384/0/68 (1) Device Error Detected: "DM SECTOR OUT OF RANGE" For the Regions how do I backup those? Since I can only back up ROM, Modules, SA Tracks, RAM Best Regards, |
Author: | Amarbir[CDR-Labs] [ August 5th, 2022, 1:17 ] |
Post subject: | Re: SpyGlass2 2.5 Firmware corruption |
CrazyDoctor wrote: pepe wrote: Hello, it is in pretty bad shape, can you back up regions and tracks? Both copies. then upload it but compressed, not like the prev one When tring to read the tracks I get those error messages: Physical read error C/H/S: -384/0/66 (1) Device Error Detected: "DM SECTOR OUT OF RANGE" Physical read error C/H/S: -384/0/67 (1) Device Error Detected: "DM SECTOR OUT OF RANGE" Physical read error C/H/S: -384/0/68 (1) Device Error Detected: "DM SECTOR OUT OF RANGE" For the Regions how do I backup those? Since I can only back up ROM, Modules, SA Tracks, RAM Best Regards, Hi , Backup Copy 0 Side Platter 00 Side Only |
Author: | Mikippp [ August 5th, 2022, 5:25 ] |
Post subject: | Re: SpyGlass2 2.5 Firmware corruption |
Hi, Ctrl + Alt + 3 Open module 35 Open SA Defect list (edit in memory) See which cylinders are turned off Deselect disabled Tracks (Cylinders) when copying Mikippp |
Author: | CrazyDoctor [ August 10th, 2022, 9:04 ] |
Post subject: | Re: SpyGlass2 2.5 Firmware corruption |
pepe wrote: Hello, it is in pretty bad shape, can you back up regions and tracks? Both copies. then upload it but compressed, not like the prev one Hi Pepe Plaese check the The regions and the tracks here https://www.filemail.com/d/undqdlqyaxgxpbe Best Regards, |
Author: | pepe [ August 10th, 2022, 18:28 ] |
Post subject: | Re: SpyGlass2 2.5 Firmware corruption |
Hello, it seems to be a big mess, gonna take some time to find out if anything can be done... pepe |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |