Main » Forums home » PC-3000 support forum

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 
  Print view Previous topic | Next topic 
Author Message
nahar
 Post subject: T32000542AS FW:CC34 0mb
PostPosted: June 16th, 2023, 12:37 
Offline

Joined: December 11th, 2021, 18:37
Posts: 9
Hello guys,

I have an old drive here, model ST32000542AS FW:CC34 he detect with 0mb... I try to fix the 93 module in both heads (this usually solves this problem) but with no success.

Any command to fix the translator or reset the SMART return "Terminal : reply timeout error" and doesn't work.

The SN it's correct and the drive start with no more problems like noise of the heads...

Has anyone seen something like this before?
Top
 Profile  
 
fzabkar
 Post subject: Re: T32000542AS FW:CC34 0mb
PostPosted: June 16th, 2023, 13:50 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15567
Location: Australia
Are you using the correct UART voltage?

_________________
A backup a day keeps DR away.
Top
 Profile  
 
nahar
 Post subject: Re: T32000542AS FW:CC34 0mb
PostPosted: June 16th, 2023, 14:21 
Offline

Joined: December 11th, 2021, 18:37
Posts: 9
fzabkar wrote:
Are you using the correct UART voltage?


Yes, i can read all modules normally and write with no problems... :|
Top
 Profile  
 
pepe
 Post subject: Re: T32000542AS FW:CC34 0mb
PostPosted: June 17th, 2023, 9:37 
Offline

Joined: October 3rd, 2005, 0:40
Posts: 4339
Location: Hungary
Quote:
Any command to fix the translator or reset the SMART return "Terminal : reply timeout error" and doesn't work.

are you able to execute any command on terminal manually?

_________________
Adatmentés - Data recovery
Top
 Profile  
 
nahar
 Post subject: Re: T32000542AS FW:CC34 0mb
PostPosted: June 19th, 2023, 12:08 
Offline

Joined: December 11th, 2021, 18:37
Posts: 9
pepe wrote:
Quote:
Any command to fix the translator or reset the SMART return "Terminal : reply timeout error" and doesn't work.

are you able to execute any command on terminal manually?



Yes, i can execute commands in the terminal manually
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 

Main » Forums home » PC-3000 support forum

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 9 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group