FW Request:WD2500AAJS-22VWA0

[Zero Alpha]

Does anybody have firmware for WD2500AAJS-22VWA0 please

[digisupport]

What version do you need ?
There are 6 firmwares in the files section here..

[Zero Alpha]

I need 005800A3 not in files section

[unknown]

https://firmware.hddsurgery.com/index.p ... rnado%202D

[Zero Alpha]

https://firmware.hddsurgery.com/index.php?manufacturer=Western%20Digital&family=Tornado%202D

I already tried mr hddsurgery but they only have 005800A3 in WD3200. Which kind of worked. I really need to try WD2500AAJS-22VWA0: 005800A3

[Zero Alpha]

I finally got the firmware for this and solved the case! The head map probably stopped other versions from working.

I'll leave this here for anybody with a similar case. PM for firmware.

Family:................................. : Tornado 2D
Techno mode key......................... : Ok

HDD Status sector....................... : Ok

RAM:
System controller (SoC)................. : 88i6745B1 0x(42B1)
HDD Info reading........................ : Ok
Heads number............................ : 3
Cyl Count............................... : 128

ROM:
Read ROM................................ : Ok
ROM Data size........................... : 192 Kb
Flash ROM dir reading................... : Ok
SA regions address...................... : by default
SA regions address (RAM)................ : by default
Module 02 access........................ : Granted

SA SPT.................................. : 857

SA Translator loading................... : Ok
SA defects assigned..................... : 1
Reading by ABA may get wrong data

ROM Modules:
ROM version............................. : 58.A3D
Module 4F F/W version................... : 005800A3
Overlay F/W version..................... : 58.A3D
Servo F/W version....................... : 01.0L

Heads configuration..................... : by map
Heads number............................ : 4
Heads number in use..................... : 3
Switched off heads...................... : Yes
Heads map............................... : 1,2,3

Relocations............................. : 0 (1 465)
Read ROM DCM............................ : Ok

Power up log reading.................... : Ok
Power up load dir data.................. : Yes
Power up load permovl................... : Yes
Power up load CFG data.................. : Yes