| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| Western Digital Encryption issues with unlocked PCB http://forum.hddguru.com/viewtopic.php?f=11&t=43668 |
Page 1 of 1 |
| Author: | beefstrudel [ September 14th, 2023, 8:51 ] |
| Post subject: | Western Digital Encryption issues with unlocked PCB |
I have a WD20SDRW-11VUUS0 in for recovery, original PCB 2060-800067-001, swapped board and ROM for an unlocked PCB from Ace Lab 2060-800065-002. Drive readies up and have access to service area. When I enable decryption on sector edit the log has messages saying SED key checking: "Wrong single key size". UA key reads okay and it identifies as Self Encryption SSD v2. Data still looks encrypted. I have PC3000 UDMA 6.9.16 with DE 5.12.11 Is this just a case of PC3K being out of date? Thanks! |
|
| Author: | melvin [ September 14th, 2023, 10:46 ] |
| Post subject: | Re: Western Digital Encryption issues with unlocked PCB |
You need to read the drive with original PCB. Solder SATA and read with it. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|