I have a WD20SDRW-11VUUS0 in for recovery, original PCB 2060-800067-001, swapped board and ROM for an unlocked PCB from Ace Lab 2060-800065-002.
Drive readies up and have access to service area.
When I enable decryption on sector edit the log has messages saying SED key checking: "Wrong single key size". UA key reads okay and it identifies as Self Encryption SSD v2.
Data still looks encrypted.
I have PC3000 UDMA 6.9.16 with DE 5.12.11

Is this just a case of PC3K being out of date?

Thanks!

You need to read the drive with original PCB. Solder SATA and read with it.

_________________
odzyskiwanie danych