All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: Rosewood A5 identify heads / FW issue
PostPosted: April 25th, 2024, 5:04 
Offline

Joined: November 23rd, 2010, 13:32
Posts: 515
Location: brisbane
Hi friends
I am unable to disable sector reallocation ,media cache & background process of a rosewood A5 hdd. After waiting patiently or 1 hour drive does not come to terminal or it loses readyness.
While trying to access sys file drive becomes busy. While tech mode unlocking reallocation starts ,in unlocked mode I can access terminal.
Do I will have to change heads ? Pls. help.


Attachments:
mcmt.PNG
mcmt.PNG [ 44.39 KiB | Viewed 3686 times ]
jjj.PNG
jjj.PNG [ 71.48 KiB | Viewed 3686 times ]
edit id.PNG
edit id.PNG [ 51.92 KiB | Viewed 3686 times ]
new3.PNG
new3.PNG [ 66.24 KiB | Viewed 3686 times ]
new2.PNG
new2.PNG [ 46.06 KiB | Viewed 3686 times ]
new 1.PNG
new 1.PNG [ 46.43 KiB | Viewed 3686 times ]
Top
 Profile  
 
 Post subject: Re: Rosewood A5 identify heads / FW issue
PostPosted: April 25th, 2024, 5:26 
Offline

Joined: November 3rd, 2023, 7:57
Posts: 17
Location: United Kingdom
Looks like your heads can't write to reallocate the bad sectors. If it was me I'd try editing system file 93 and see if the changes stick, if they don't more than likely heads can't write. After this it's up to you to try turning reallocation off in RAM or swap the heads and write it to the system file.


Top
 Profile  
 
 Post subject: Re: Rosewood A5 identify heads / FW issue
PostPosted: April 25th, 2024, 12:31 
Offline
User avatar

Joined: January 28th, 2009, 10:54
Posts: 3497
Location: Greece
h1 doesn't read.
Additionally, WP for these drives is a must, especially for drives in this condition.
Having it being tortured for an hour was also not a good idea. I'd expect MD now. Sorry. :(

I'd examine the heads under microscope and then decide my next move.

_________________
http://www.northwind.gr
SandForce SSD Recovery
Ransomware Reverse Engineering - NoMoreRansom! partners


Top
 Profile  
 
 Post subject: Re: Rosewood A5 identify heads / FW issue
PostPosted: April 26th, 2024, 8:13 
Offline

Joined: November 23rd, 2010, 13:32
Posts: 515
Location: brisbane
northwind wrote:
h1 doesn't read.
Additionally, WP for these drives is a must, especially for drives in this condition.
Having it being tortured for an hour was also not a good idea. I'd expect MD now. Sorry. :(

I'd examine the heads under microscope and then decide my next move.


Thank you so much northwind , I have learnt lesson that R & D efforts for an hour could be lethal for this family.I will be careful henceforth. :-D :good:


Top
 Profile  
 
 Post subject: Re: Rosewood A5 identify heads / FW issue
PostPosted: April 26th, 2024, 8:19 
Offline

Joined: November 23rd, 2010, 13:32
Posts: 515
Location: brisbane
skinbob wrote:
Looks like your heads can't write to reallocate the bad sectors. If it was me I'd try editing system file 93 and see if the changes stick, if they don't more than likely heads can't write. After this it's up to you to try turning reallocation off in RAM or swap the heads and write it to the system file.


Thanks a lot skinbob :-D :good:
Actually sys file 93 is unredable ,drive goes to non ready state ,I think head transplant is must for this case.
Since customer was needing single database file of 300mb and was having limited budget so I was trying to recover it on firmware level.


Top
 Profile  
 
 Post subject: Re: Rosewood A5 identify heads / FW issue
PostPosted: April 30th, 2024, 23:05 
Offline

Joined: March 9th, 2017, 6:16
Posts: 114
Location: trinidad
Anyone can solve this case in flat 4 minutes since you are unable to read system files properly.
PM me your details ,I will remotely solve it free of cost.


Top
 Profile  
 
 Post subject: Re: Rosewood A5 identify heads / FW issue
PostPosted: May 1st, 2024, 9:53 
Offline

Joined: November 23rd, 2010, 13:32
Posts: 515
Location: brisbane
bunty wrote:
Anyone can solve this case in flat 4 minutes since you are unable to read system files properly.
PM me your details ,I will remotely solve it free of cost.


Thanks a ton :D :good:


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group