| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| Adata US750 SSD Sata very slow http://forum.hddguru.com/viewtopic.php?f=11&t=44357 |
Page 1 of 1 |
| Author: | Core.iStores [ June 4th, 2024, 22:08 ] |
| Post subject: | Adata US750 SSD Sata very slow |
i have a US750 SSD to recover it's identified successfully but when it comes to copy data it becomes very slow and the hot and suggestions about that ? |
|
| Author: | andy17d [ June 5th, 2024, 4:08 ] |
| Post subject: | Re: Adata US750 SSD Sata very slow |
I think you meant Adata SU750. Did you run it in technology mode? What's your transfer rate? What controller do you have there? This model works rather well with Pc3k. Unless you get an unsupported controller. Here is an example case report. https://kodit.pl/odzyskiwanie-danych-z- ... mate-su650 |
|
| Author: | Core.iStores [ June 5th, 2024, 14:17 ] |
| Post subject: | Re: Adata US750 SSD Sata very slow |
andy17d wrote: I think you meant Adata SU750. Did you run it in technology mode? What's your transfer rate? What controller do you have there? This model works rather well with Pc3k. Unless you get an unsupported controller. Here is an example case report. https://kodit.pl/odzyskiwanie-danych-z- ... mate-su650 yes i mean SU750 Adata sorry about mistyped the controller is RTS5733DMQ |
|
| Author: | Arch Stanton [ June 6th, 2024, 7:15 ] |
| Post subject: | Re: Adata US750 SSD Sata very slow |
What do you mean 'hot', did you simply point your thermal camera again? What causes the slowness, how are you copying, using what tool? You give very little to work with. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|