HDD GURU FORUMS :: View topic - Rosewood_8C ST2000LM007 Stays Busy -Any secret Tip

HDD GURU FORUMS http://forum.hddguru.com/

Rosewood_8C ST2000LM007 Stays Busy -Any secret Tip http://forum.hddguru.com/viewtopic.php?f=11&t=44636	Page 1 of 1

Author:	terminator2 [ September 4th, 2024, 10:40 ]
Post subject:	Rosewood_8C ST2000LM007 Stays Busy -Any secret Tip
Guys I have backed up sys files 28 /93 & 346 , I am unable to disable reallocation as disk becomes busy & give time out. Terminal shows -- Update Mask - 0000000000588DDBB0000008-00 I have tried everything but no way. Besides SMP flags is there any other file I can update for further refinement ? I will be thankful for any suggestion.

Author:	digisupport [ September 4th, 2024, 14:19 ]
Post subject:	Re: Rosewood_8C ST2000LM007 Stays Busy -Any secret Tip
Define "tried every thing" If drive is bsy and you have backup i assume you have terminal access. Why don´t you disable functions by terminal?

Author:	terminator2 [ September 4th, 2024, 22:52 ]
Post subject:	Re: Rosewood_8C ST2000LM007 Stays Busy -Any secret Tip
digisupport wrote: Define "tried every thing" If drive is bsy and you have backup i assume you have terminal access. Why don´t you disable functions by terminal? Thanks I tried fzabkar's script but it doesn't work.Then I tried to initilize hard disk by entering in utility by powered on /off state etc. While entering utility disk stays busy while unlocking it shows id. I am not much confident about commands but will give it a try , is there any single command for all rosewood variants ? Besides SMP is there anything I can do

Author:

terminator2 [ September 5th, 2024, 2:45 ]

Post subject:

Re: Rosewood_8C ST2000LM007 Stays Busy -Any secret Tip

digisupport wrote:

Define "tried every thing"
If drive is bsy and you have backup i assume you have terminal access.
Why don´t you disable functions by terminal?

I have been following your advice from your previous posts :-
You can try to stabilize the drive and turn on further diag msg.
When you launch F3 util:
1. :At utility start section : Select correct HDD ID in RAM + Install Write Protection
2. : In Actions: select "Unlock Tech Mode, drive prepared by utility" (drive will send handshake to unlock and read ID and select family)
3. : Do a backup of important fw. Indirect or Terminal.
Edit ID via terminal, turn on additional diag msg.
Restart drive, unlock and again install write protection and launch util.

Attachments:

33.PNG [ 60.13 KiB | Viewed 9669 times ]

FZ1.PNG [ 45.85 KiB | Viewed 9669 times ]

Author:	Disk Solution [ September 5th, 2024, 15:02 ]
Post subject:	Re: Rosewood_8C ST2000LM007 Stays Busy -Any secret Tip
It looks like a Possible case I can solve remotely for $ 120.

Author:	terminator2 [ September 17th, 2024, 11:39 ]
Post subject:	Re: Rosewood_8C ST2000LM007 Stays Busy -Any secret Tip
Come on , hurry up guys pls. give me some hint before posting this request to another forum & saying good bye to hddguru

Author:	Zero Alpha [ September 17th, 2024, 20:07 ]
Post subject:	Re: Rosewood_8C ST2000LM007 Stays Busy -Any secret Tip
Rosewood drives can be very complex even for the experienced. Do you have a backup of all the firmware or can you only access it via terminal?

Author:	terminator2 [ September 17th, 2024, 22:37 ]
Post subject:	Re: Rosewood_8C ST2000LM007 Stays Busy -Any secret Tip
Zero Alpha wrote: Rosewood drives can be very complex even for the experienced. Do you have a backup of all the firmware or can you only access it via terminal? Thanks ,I have subscribed to your youtube channel & regularly watch your videos . yes I agreed each case is unique. I know this drive can be fixed by simple fw trick who has enough experience. Its all about timings & how we enter in utility like - 1) Powering first & auto detect enter unlock before utility start 2) enter utility without powering (common f3) then power on & unlock 3) enter without unlocking power on & unlock. for each of this drive behave differently In this case drive does not respond to sys file 93 (hdd editor in ram or SMP flag updating etc) I think by modifying file in terminal may work but I am not confident and don't want to do experimentation with client disk.

Author:	Zero Alpha [ September 18th, 2024, 21:34 ]
Post subject:	Re: Rosewood_8C ST2000LM007 Stays Busy -Any secret Tip
This is the most common hard drive I get in and yes there are some simple tricks for common problems but there is also some very difficult problems. Can you turn the drive off and on and enter the Rosewood_8C utility and post everything from the 'Log' tab. Also post a clean terminal log so I can see how it behaves from power on.

Author:	terminator2 [ September 19th, 2024, 0:23 ]
Post subject:	Re: Rosewood_8C ST2000LM007 Stays Busy -Any secret Tip
Zero Alpha wrote: This is the most common hard drive I get in and yes there are some simple tricks for common problems but there is also some very difficult problems. Can you turn the drive off and on and enter the Rosewood_8C utility and post everything from the 'Log' tab. Also post a clean terminal log so I can see how it behaves from power on. Thank you so much Zero Alpha Here are both logs- Software can`t control COM port signal level for this USB/COM adapter Software can`t control COM port signal level for this USB/COM adapter Switching HDD power supply OFF Software can`t control COM port signal level for this USB/COM adapter Switching HDD power supply ON Selected family......................... : 8C, Rosewood_8C Model by ID............................. : <HDD ID NOT READ> Loading default settings! Use the options dialog to review and save utility settings. Then press OK! Family default settings loading! Tech Key... Requesting FW Pkg ver ........ RD075A.SDM2.AA6985.SBK2 Detecting SA Phys Sct Size... Result.................................. : 4096 Detecting UA Phys Sct Size... Result.................................. : 4096 Detecting Max Head number... Phys. heads............................. : 4 Obtaining Saved Mode Pages File information... Reading Saved Mode Pages... Parsing Saved Mode Pages... SMP Dbl: 0x3C001000 - 0x0001FFFF (0x0000000F) LBA alignment........................... : 0 Obtaining Registry File information... Reading Registry File... Parsing Registry File... Media Cache =========== MC : enabled MC Size : 0x0 MC MCMT Ver is unavailable!!! Collecting Sys Files information... ID Len =============== 0 40 Reserved Defect Table (SA defect table) 1 8 Drive Information File (DIF) 2 16 Performance Parameter File (PPF) 3 7800 Primary Defect File (P-List) 5 8 Manufacturing Information File (MIF) 8 4800 B 1000 C 122880 Serial Port Test Results File (Self Scan Log) D 160 E 432 Data Integrity Check (DIC), HEAD 0 F 224 DIC Dummy File 13 8 Disc Registry File (settings, security, etc) 15 128 BGMS File (Directed Offline Scan) 16 8 17 40 19 32 Log File 1A 40 Log File 1B 8 Log File 1C 16 1D 128 Physical Overlay File 0 1E 128 Physical Overlay File 1 20 384 Physical Overlay File 3 21 256 Physical Overlay File 4 22 80 Drive Self Test (DST), Head 0 23 80 Drive Self Test (DST), Head 1 24 80 Drive Self Test (DST), Head 2 25 80 Drive Self Test (DST), Head 3 2A 16 Saved Mode Pages (HDD settings) 2B 1896 R/W Operating Parameters (translator, etc) 2C 432 Data Integrity Check (DIC), HEAD 1 2D 432 Data Integrity Check (DIC), HEAD 2 2E 432 Data Integrity Check (DIC), HEAD 3 33 4576 34 640 Packed CONGEN XML definition 3A 8 3D 3072 Disc firmware container 1 3E 3072 Disc firmware container 2 3F 4576 SED parameters 40 16 SED parameters 41 2184 SED parameters 42 4096 ST Ovl 43 5128 Defect list report file 44 2121520 BIG file 45 1664000 BIG file 46 240856 BIG file 47 173800 BIG file 48 592 BIG file 49 232 BIG file 4A 42040 BIG file 4B 4352 4F 8192 50 15816 MCMT 52 8 58 12800 5C 2048 Collecting Sys File Infos completed Collecting DT Infos... ROM: ID MemOffs Len =========================== 0 80200000 230400 Read Adaptive Parameters File (RAP) 1 80239400 512 Controller Adaptive Parameters File (CAP) 4 112F00 8192 Servo Adaptive Parameter File (SAP) A 45DB28 1024 Seek Profile 13 80252C80 2448 Dependent Zone Table for User Area 14 80258618 32 Dependent Zone Table for System Area 15 0 1048576 Flash ROM 1D 80200020 5000 VBAR Configuration File 1E 802028A8 9680 Zone Format Parameters File 26 8024BDD0 28336 27 8024BCB0 288 RAM: ID MemOffs Len =========================== 0 80200000 230400 Read Adaptive Parameters File (RAP) 1 80239400 512 Controller Adaptive Parameters File (CAP) 2 802013A8 4832 Zone Table 4 112F00 8192 Servo Adaptive Parameter File (SAP) 6 13DC6A0 81940 Servo Flaw Table A 45DB28 1024 Seek Profile 13 80252C80 2448 Dependent Zone Table for User Area 14 80258618 32 Dependent Zone Table for System Area 15 0 1048576 Flash ROM 16 80200000 32 Drive Configuration Table 17 802061A8 4848 Temperature Control Configuration 1D 80200020 5000 VBAR Configuration File 1E 802028A8 9680 Zone Format Parameters File 1F 8052CCB8 19584 RW working user preamp table 20 80531938 128 RW working system preamp table 22 81037000 692224 25 810E0000 315392 26 8024BDD0 28336 27 8024BCB0 288 28 80FE4000 327680 39 80BDB0A0 2228224 3E 80255198 13440 3F 80258638 480 Collecting DT Infos completed System Files I/O method detection... ATA(direct) Reading autotuning buffer............... Ok Buff Root FAT searching in RAM......... Ok Searching module table in RAM... ....... Ok Searching DT table(RAM, WR) in RAM...... Ok Searching DT table(RAM, RD) in RAM...... Ok Searching volume 0 file table in RAM.... Ok Searching volume 1/2 file table in RAM... Ok Searching volume 3 file table in RAM.... Ok Searching volume 4/5 file table in RAM... Ok Request for volume 9/A file allocation table in RAM Ok Searching SMP RAM FID in RAM............ Ok Searching Non Resident G-List FID in RAM Ok Searching CFW OVL FID in RAM............ Ok Search for DBA Base in RAM.............. Ok Search for RW Sys File DBA in RAM....... Ok Search for MCMT RAM FD in RAM........... Ok Terminal :- Boot 0x80M QB Rst 0x80MSrvDETCR init 0x0000 (P) SATA Reset RAW OFF PASS Drive AMPS Configuration has been modified from compiled defaults. Drive must be re-initialized to controller firmware defaults by re-downloading controller firmware DO NOT SHIP WITHOUT FIRST RE-DOWNLOADING CONTROLLER FIRMWARE OR RESETTING TO DEFAULTS! (DOS Table) Worst Count: 00000C08 At SU: 00005130 NT: 00000000 OT: 00000001 (POR) Recover Secondary MCMT Opened Recovered DSC PASS Starting LBA of RW Request=000B11D73D Length=00000298 ProcessRWError -Read- at LBA 000B11D7AD Sense Code=43110081 ProcessRecoveryComp-2 ERC TO exceeded, orig value in us:FFFFFFFF MS Read Fails: 588EB9E8,000014C0 (MC POR Duration): 00000004B0 Intel 6G->3G Send Status: COMRESET seen CSpd= 3Gbps DSC Update Mask -Out: Update Mask - 00000000588DD660 - 00000008 - 00 Update Mask - 00000000588DD668 - 00000008 - 00 Starting LBA of RW Request=000B11BAB5 Length=00001DD4 ProcessRWError -Read- at LBA 000B11BAD3 Sense Code=43110081Out: Starting LBA of RW Request=000B11BAB5 Length=00001DD4 ProcessRWError -Read- at LBA 000B11BAD5 Sense Code=43110081Out: Starting LBA of RW Request=000B11BAB5 Length=00001DD4 ProcessRWError -Read- at LBA 000B11BAD6 Sense Code=43110081Out: Update Mask - 00000000588DD6B8 - 00000008 - 00 Starting LBA of RW Request=000B11BAB5 Length=00001DD4 ProcessRWError -Read- at LBA 000B11BADA Sense Code=43110081Out: Starting LBA of RW Request=000B11BAB5 Length=00001DD4 ProcessRWError -Read- at LBA 000B11BADB Sense Code=43110081Out: Starting LBA of RW Request=000B11BAB5 Length=00001DD4 ProcessRWError -Read- at LBA 000B11BADF Sense Code=43110081Out: Starting LBA of RW Request=000B11BAB5 Length=00001DD4 ProcessRWError -Read- at LBA 000B11BAE0 Sense Code=43110081Out: Update Mask - 00000000588DD708 - 00000008 - 00 Update Mask - 00000000588DD710 - 00000008 - 00 Update Mask - 00000000588DD718 - 00000008 - 00 Starting LBA of RW Request=000B11BAB5 Length=00001DD4 ProcessRWError -Read- at LBA 000B11BAE4 Sense Code=43110081Out: Update Mask - 00000000588DD728 - 00000008 - 00 Starting LBA of RW Request=000B11BAB5 Length=00001DD4 ProcessRWError -Read- at LBA 000B11BAE6 Sense Code=43110081Out: Update Mask - 00000000588DD748 - 00000008 - 00 Update Mask - 00000000588DD750 - 00000008 - 00 Update Mask - 00000000588DD758 - 00000008 - 00 Starting LBA of RW Request=000B11BAB5 Length=00001DD4 ProcessRWError -Read- at LBA 000B11BAEC Sense Code=43110081 Hd 2 Err Blk B11BAEC BER pre -1.792827 ProcessRC: 00000000,00000000ReadContinuous: 0B11BAEC,00000261TotalEntries:0004 XfrLen:0261UnrecovSectorCount:0004,0003NumUDEs: 00000004,00000003Failed: 40000087Out: SP Regen FAIL SPRegen [0000\|43110081] @LBA=0x0B11BAECOut: Update Mask - 00000000588DD760 - 00000008 - 00 Harden - 0B11BAEC InitiateMarkPendingReallocateRequest for disc_lba: 000B11BAEC CHS: 00023B6D.02.0037 Assert 741D - LBA 0B11BAEC! Update Mask - 00000000588DD780 - 00000008 - 00 Update Mask - 00000000588DD788 - 00000008 - 00 Update Mask - 00000000588DD790 - 00000008 - 00 Starting LBA of RW Request=000B11BAB5 Length=00001DD4 ProcessRWError -Read- at LBA 000B11BAF4 Sense Code=43110081Out: Update Mask - 00000000588DD7A8 - 00000008 - 00 Update Mask - 00000000588DD7B0 - 00000008 - 00 Starting LBA of RW Request=000B11BAB5 Length=00001DD4 ProcessRWError -Read- at LBA 000B11BAF7 Sense Code=43110081Out: Starting LBA of RW Request=000B11BAB5 Length=00001DD4 ProcessRWError -Read- at LBA 000B11BAF8 Sense Code=43110081Out: Update Mask - 00000000588DD7C8 - 00000008 - 00 Starting LBA of RW Request=000B11BAB5 Length=00001DD4 ProcessRWError -Read- at LBA 000B11BAFA Sense Code=43110081Out: Update Mask - 00000000588DD7D8 - 00000008 - 00 Update Mask - 00000000588DD7E0 - 00000008 - 00 Starting LBA of RW Request=000B11BAB5 Length=00001DD4 ProcessRWError -Read- at LBA 000B11BAFE Sense Code=43110081Out: Update Mask - 00000000588DD7F8 - 00000008 - 00 Update Mask - 00000000588DD800 - 00000008 - 00 Starting LBA of RW Request=000B11BAB5 Length=00001DD4 ProcessRWError -Read- at LBA 000B11BB01 Sense Code=43110081Out: Update Mask - 00000000588DD810 - 00000008 - 00 Update Mask - 00000000588DD818 - 00000008 - 00 Update Mask - 00000000588DD820 - 00000008 - 00 Update Mask - 00000000588DD828 - 00000008 - 00 Update Mask - 00000000588DD830 - 00000008 - 00 Update Mask - 00000000588DD838 - 00000008 - 00 Update Mask - 00000000588DD840 - 00000008 - 00 Update Mask - 00000000588DD848 - 00000008 - 00 Update Mask - 00000000588DD850 - 00000008 - 00 Update Mask - 00000000588DD858 - 00000008 - 00 Update Mask - 00000000588DD860 - 00000008 - 00 Starting LBA of RW Request=000B11BAB5 Length=00001DD4 ProcessRWError -Read- at LBA 000B11BB0D Sense Code=43110081Out: Update Mask - 00000000588DD870 - 00000008 - 00 Update Mask - 00000000588DD878 - 00000008 - 00 Starting LBA of RW Request=000B11BAB5 Length=00001DD4 ProcessRWError -Read- at LBA 000B11BB10 Sense Code=43110081Out: Update Mask - 00000000588DD8B0 - 00000008 - 00 Update Mask - 00000000588DD8B8 - 00000008 - 00 Update Mask - 00000000588DD8C0 - 00000008 - 00 Starting LBA of RW Request=000B11BAB5 Length=00001DD4 ProcessRWError -Read- at LBA 000B11BB1A Sense Code=43110081Out: Update Mask - 00000000588DD8D8 - 00000008 - 00 Starting LBA of RW Request=000B11BAB5 Length=00001DD4 ProcessRWError -Read- at LBA 000B11BB1C Sense Code=43110081Out: Starting LBA of RW Request=000B11BAB5 Length=00001DD4 ProcessRWError -Read- at LBA 000B11BB1D Sense Code=43110081Out: Update Mask - 00000000588DD908 - 00000008 - 00 Starting LBA of RW Request=000B11BAB5 Length=00001DD4 ProcessRWError -Read- at LBA 000B11BB22 Sense Code=43110081Out: Starting LBA of RW Request=000B11BAB5 Length=00001DD4 ProcessRWError -Read- at LBA 000B11BB24 Sense Code=43110081Out: Update Mask - 00000000588DD928 - 00000008 - 00 Starting LBA of RW Request=000B11BAB5 Length=00001DD4 ProcessRWError -Read- at LBA 000B11BB26 Sense Code=43110081Out: Starting LBA of RW Request=000B11BAB5 Length=00001DD4 ProcessRWError -Read- at LBA 000B11BB27 Sense Code=43110081Out: Update Mask - 00000000588DD940 - 00000008 - 00 Update Mask - 00000000588DD948 - 00000008 - 00 Starting LBA of RW Request=000B11BAB5 Length=00001DD4 ProcessRWError -Read- at LBA 000B11BB2A Sense Code=43110081Out: Starting LBA of RW Request=000B11BAB5 Length=00001DD4 ProcessRWError -Read- at LBA 000B11BB2D Sense Code=43110081Out: Update Mask - 00000000588DD970 - 00000008 - 00 Starting LBA of RW Request=000B11BAB5 Length=00001DD4 ProcessRWError -Read- at LBA 000B11BB3E Sense Code=43110081Out: Starting LBA of RW Request=000B11BAB5 Length=00001DD4 ProcessRWError -Read- at LBA 000B11BB40 Sense Code=43110081Out: Update Mask - 00000000588DDAB0 - 00000008 - 00 Update Mask - 00000000588DDAB8 - 00000008 - 00 Starting LBA of RW Request=000B11BAB5 Length=00001DD4 ProcessRWError -Read- at LBA 000B11BB5A Sense Code=43110081Out: Update Mask - 00000000588DDAD8 - 00000008 - 00 Update Mask - 00000000588DDAE0 - 00000008 - 00 Update Mask - 00000000588DDAE8 - 00000008 - 00 Update Mask - 00000000588DDB00 - 00000008 - 00 Update Mask - 00000000588DDB08 - 00000008 - 00 Starting LBA of RW Request=000B11BAB5 Length=00001DD4 ProcessRWError -Read- at LBA 000B11BB62 Sense Code=43110081Out: Update Mask - 00000000588DDB18 - 00000008 - 00 Starting LBA of RW Request=000B11BAB5 Length=00001DD4 ProcessRWError -Read- at LBA 000B11BB64 Sense Code=43110081Out: Update Mask - 00000000588DDB28 - 00000008 - 00 Update Mask - 00000000588DDB30 - 00000008 - 00 Update Mask - 00000000588DDB38 - 00000008 - 00 Update Mask - 00000000588DDB40 - 00000008 - 00 Starting LBA of RW Request=000B11BAB5 Length=00001DD4 ProcessRWError -Read- at LBA 000B11BB69 Sense Code=43110081 Hd 2 Err Blk B11BB69 BER pre -1.803039 ProcessRC: 00000002,00000000ReadContinuous: 0B11BB69,000001E4TotalEntries:0004 XfrLen:01E4UnrecovSectorCount:0003,0003NumUDEs: 00000003,00000003Failed: 40000087Out: SP Regen FAIL SPRegen [0000\|43110081] @LBA=0x0B11BB69Out: Update Mask - 00000000588DDB48 - 00000008 - 00 Harden - 0B11BB69 InitiateMarkPendingReallocateRequest for disc_lba: 000B11BB69 CHS: 00023B6D.02.00B4 Assert 741D - LBA 0B11BB69! Update Mask - 00000000588DDB68 - 00000008 - 00 Starting LBA of RW Request=000B11BAB5 Length=00001DD4 ProcessRWError -Read- at LBA 000B11BB70 Sense Code=43110081Out: Update Mask - 00000000588DDB88 - 00000008 - 00 Update Mask - 00000000588DDB90 - 00000008 - 00 Starting LBA of RW Request=000B11BAB5 Length=00001DD4 ProcessRWError -Read- at LBA 000B11BB74 Sense Code=43110081Out: Starting LBA of RW Request=000B11BAB5 Length=00001DD4 ProcessRWError -Read- at LBA 000B11BB75 Sense Code=43110081Out: Update Mask - 00000000588DDBB0 - 00000008 - 00 Update Mask - 00000000588DDBB8 - 00000008 - 00 Update Mask - 00000000588DDBC8 - 00000008 - 00 Update Mask - 00000000588DDC00 - 00000008 - 00 Update Mask - 00000000588DDC20 - 00000008 - 00 Starting LBA of RW Request=000B11BAB5 Length=00001DD4 ProcessRWError -Read- at LBA 000B11BB8F Sense Code=43110081Out: Starting LBA of RW Request=000B11BAB5 Length=00001DD4 ProcessRWError -Read- at LBA 000B11BB92 Sense Code=43110081Out: Starting LBA of RW Request=000B11BAB5 Length=00001DD4 ProcessRWError -Read- at LBA 000B11BB93 Sense Code=43110081Out: Starting LBA of RW Request=000B11BAB5 Length=00001DD4 ProcessRWError -Read- at LBA 000B11BB96 Sense Code=43110081Out: Starting LBA of RW Request=000B11BAB5 Length=00001DD4 ProcessRWError -Read- at LBA 000B11BBA0 Sense Code=43110081Out: Starting LBA of RW Request=000B11BAB5 Length=00001DD4 ProcessRWError -Read- at LBA 000B11BBA3 Sense Code=43110081Out: Starting LBA of RW Request=000B11BAB5 Length=00001DD4 ProcessRWError -Read- at LBA 000B11BC00 Sense Code=43110081Out: Update Mask - 00000000588DE068 - 00000008 - 00 Update Mask - 00000000588DE070 - 00000008 - 00 Update Mask - 00000000588DE078 - 00000008 - 00 Update Mask - 00000000588DE0C8 - 00000008 - 00 Starting LBA of RW Request=000B11BAB5 Length=00001DD4 ProcessRWError -Read- at LBA 000B11BC1D Sense Code=43110081Out: Starting LBA of RW Request=000B11BAB5 Length=00001DD4 ProcessRWError -Read- at LBA 000B11BC1E Sense Code=43110081Out: Starting LBA of RW Request=000B11BAB5 Length=00001DD4 ProcessRWError -Read- at LBA 000B11BC22 Sense Code=43110081Out: Starting LBA of RW Request=000B11BAB5 Length=00001DD4 ProcessRWError -Read- at LBA 000B11BC26 Sense Code=43110081Out: Update Mask - 00000000588DE260 - 00000008 - 00 Starting LBA of RW Request=000B11BAB5 Length=00001DD4 ProcessRWError -Read- at LBA 000B11BC4D Sense Code=43110081Out: Starting LBA of RW Request=000B11BAB5 Length=00001DD4 ProcessRWError -Read- at LBA 000B11BC51 Sense Code=43110081Out: Starting LBA of RW Request=000B11BAB5 Length=00001DD4 ProcessRWError -Read- at LBA 000B11BC52 Sense Code=43110081Out: Starting LBA of RW Request=000B11BAB5 Length=00001DD4 ProcessRWError -Read- at LBA 000B11BC5A Sense Code=43110081 Hd 2 Err Blk B11BC5A BER pre -1.801642 ProcessRC: 00000002,00000000ReadContinuous: 0B11BC5A,0000023FTotalEntries:001B XfrLen:023FUnrecovSectorCount:0010,001ANumUDEs: 00000010,0000001AFailed: 40000087Out: SP Regen FAIL SPRegen [0000\|43110081] @LBA=0x0B11BC5AOut: Update Mask - 00000000588DE2D0 - 00000008 - 00 Harden - 0B11BC5A InitiateMarkPendingReallocateRequest for disc_lba: 000B11BC5A CHS: 00023B6E.02.0059 Assert 741D - LBA 0B11BC5A! Starting LBA of RW Request=000B11BAB5 Length=00001DD4 ProcessRWError -Read- at LBA 000B11BC5B Sense Code=43110081Out: Starting LBA of RW Request=000B11BAB5 Length=00001DD4 ProcessRWError -Read- at LBA 000B11BC5C Sense Code=43110081Out: Starting LBA of RW Request=000B11BAB5 Length=00001DD4 ProcessRWError -Read- at LBA 000B11BC60 Sense Code=43110081Out: Starting LBA of RW Request=000B11BAB5 Length=00001DD4 ProcessRWError -Read- at LBA 000B11BC62 Sense Code=43110081Out: Starting LBA of RW Request=000B11BAB5 Length=00001DD4 ProcessRWError -Read- at LBA 000B11BC73 Sense Code=43110081Out: Update Mask - 00000000588DE3A8 - 00000008 - 00 Starting LBA of RW Request=000B11BAB5 Length=00001DD4 ProcessRWError -Read- at LBA 000B11BC76 Sense Code=43110081 Hd 2 Err Blk B11BC76 BER pre -1.805312 ProcessRC: 00000002,00000000ReadContinuous: 0B11BC76,00000223TotalEntries:000F XfrLen:0223UnrecovSectorCount:000E,000DNumUDEs: 0000000E,0000000DFailed: 40000087Out: SP Regen FAIL SPRegen [0000\|43110081] @LBA=0x0B11BC76Out: Update Mask - 00000000588DE3B0 - 00000008 - 00 Harden - 0B11BC76 InitiateMarkPendingReallocateRequest for disc_lba: 000B11BC76 CHS: 00023B6E.02.0075 Assert 741D - LBA 0B11BC76! Starting LBA of RW Request=000B11BAB5 Length=00001DD4 ProcessRWError -Read- at LBA 000B11BC77 Sense Code=43110081 Hd 2 Err Blk B11BC77 BER pre -1.806229 ProcessRC: 00000002,00000000ReadContinuous: 0B11BC77,00000222TotalEntries:000E XfrLen:0222UnrecovSectorCount:000D,000CNumUDEs: 0000000D,0000000CFailed: 40000087Out:

Author:	MindMergepk [ September 19th, 2024, 7:05 ]
Post subject:	Re: Rosewood_8C ST2000LM007 Stays Busy -Any secret Tip
terminator2 wrote: Zero Alpha wrote: SP Regen FAIL SPRegen [0000\|43110081] @LBA=0x0B11BAECOut: Hd 2 Err Blk B11BB69 BER pre -1.803039 ProcessRC: 00000002,00000000ReadContinuous: 0B11BB69,000001E4TotalEntries:0004 XfrLen:01E4UnrecovSectorCount:0003,0003NumUDEs: 00000003,00000003Failed: 40000087Out: SP Regen FAIL SPRegen [0000\|43110081] @LBA=0x0B11BB69Out: Hd 2 Err Blk B11BC5A BER pre -1.801642 ProcessRC: 00000002,00000000ReadContinuous: 0B11BC5A,0000023FTotalEntries:001B XfrLen:023FUnrecovSectorCount:0010,001ANumUDEs: 00000010,0000001AFailed: 40000087Out: SP Regen FAIL SPRegen [0000\|43110081] @LBA=0x0B11BC5AOut: Hd 2 Err Blk B11BC76 BER pre -1.805312 ProcessRC: 00000002,00000000ReadContinuous: 0B11BC76,00000223TotalEntries:000F XfrLen:0223UnrecovSectorCount:000E,000DNumUDEs: 0000000E,0000000DFailed: 40000087Out: SP Regen FAIL SPRegen [0000\|43110081] @LBA=0x0B11BC76Out: Hd 2 Err Blk B11BC77 BER pre -1.806229 ProcessRC: 00000002,00000000ReadContinuous: 0B11BC77,00000222TotalEntries:000E XfrLen:0222UnrecovSectorCount:000D,000CNumUDEs: 0000000D,0000000CFailed: 40000087Out: 99% there is a faulty/failing head out of 4, PM me

Author:	terminator2 [ September 19th, 2024, 11:29 ]
Post subject:	Re: Rosewood_8C ST2000LM007 Stays Busy -Any secret Tip
MindMergepk wrote: terminator2 wrote: Zero Alpha wrote: SP Regen FAIL SPRegen [0000\|43110081] @LBA=0x0B11BAECOut: Hd 2 Err Blk B11BB69 BER pre -1.803039 ProcessRC: 00000002,00000000ReadContinuous: 0B11BB69,000001E4TotalEntries:0004 XfrLen:01E4UnrecovSectorCount:0003,0003NumUDEs: 00000003,00000003Failed: 40000087Out: SP Regen FAIL SPRegen [0000\|43110081] @LBA=0x0B11BB69Out: Hd 2 Err Blk B11BC5A BER pre -1.801642 ProcessRC: 00000002,00000000ReadContinuous: 0B11BC5A,0000023FTotalEntries:001B XfrLen:023FUnrecovSectorCount:0010,001ANumUDEs: 00000010,0000001AFailed: 40000087Out: SP Regen FAIL SPRegen [0000\|43110081] @LBA=0x0B11BC5AOut: Hd 2 Err Blk B11BC76 BER pre -1.805312 ProcessRC: 00000002,00000000ReadContinuous: 0B11BC76,00000223TotalEntries:000F XfrLen:0223UnrecovSectorCount:000E,000DNumUDEs: 0000000E,0000000DFailed: 40000087Out: SP Regen FAIL SPRegen [0000\|43110081] @LBA=0x0B11BC76Out: Hd 2 Err Blk B11BC77 BER pre -1.806229 ProcessRC: 00000002,00000000ReadContinuous: 0B11BC77,00000222TotalEntries:000E XfrLen:0222UnrecovSectorCount:000D,000CNumUDEs: 0000000D,0000000CFailed: 40000087Out: 99% there is a faulty/failing head out of 4, PM me Oh yes that must be the reason for drive becoming busy .Initially when it came it was having instant detection but after unlocking it lost default detection & after unlocking only it get in ready state. Unfortunately I can't use DE to check heads. Thanks

Author:	northwind [ September 20th, 2024, 4:16 ]
Post subject:	Re: Rosewood_8C ST2000LM007 Stays Busy -Any secret Tip
Head 2 has MD.

Author:	terminator2 [ September 21st, 2024, 2:31 ]
Post subject:	Re: Rosewood_8C ST2000LM007 Stays Busy -Any secret Tip
northwind wrote: Head 2 has MD. Thanks yes I cannot issue any command as reallocation is not getting stopped , in unlocked mode only I can issue commands which is of no use. Head change might be only solution else is it possible to disable head 2 and access drive normally so as to get partial data.

Page 1 of 1	All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/