Hi I have a Kingstone SATA SSD with CP33238B
but after shorting the pin to start Safe mode I get this error
I am using Acelab PC PATA-SATA
| Attachments: |
|
SATA-PATA.PNG [ 10.43 KiB | Viewed 16392 times ] |
| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| SSD PC SATA-PATA Bridge Errorr http://forum.hddguru.com/viewtopic.php?f=11&t=45088 |
Page 1 of 1 |
| Author: | LostDataSa [ February 5th, 2025, 8:54 ] | ||
| Post subject: | SSD PC SATA-PATA Bridge Errorr | ||
Hi I have a Kingstone SATA SSD with CP33238B but after shorting the pin to start Safe mode I get this error I am using Acelab PC PATA-SATA
|
|||
| Author: | Lukas [ February 5th, 2025, 9:48 ] |
| Post subject: | Re: SSD PC SATA-PATA Bridge Errorr |
And when starting the program you select the appropriate PATA port, not SATA? |
|
| Author: | LostDataSa [ February 5th, 2025, 12:30 ] |
| Post subject: | Re: SSD PC SATA-PATA Bridge Errorr |
Lukas wrote: And when starting the program you select the appropriate PATA port, not SATA? Yes |
|
| Author: | Lukas [ February 6th, 2025, 3:00 ] |
| Post subject: | Re: SSD PC SATA-PATA Bridge Errorr |
The message clearly suggests using the application's SATA port rather than the PATA port. If everything is connected correctly on original Acelab adapters contact their support. |
|
| Author: | pepe [ February 6th, 2025, 3:21 ] |
| Post subject: | Re: SSD PC SATA-PATA Bridge Errorr |
No, the message says the utility has problems getting data through the INTERNAL (on-board, marvel 88SA8052) PATA-SATA bridge and suggests to use one of the PATA ports with the jmicron PATA-SATA (JMS20330) bridge attached. You also need to start the util using the PATA port. |
|
| Author: | Lukas [ February 6th, 2025, 4:02 ] |
| Post subject: | Re: SSD PC SATA-PATA Bridge Errorr |
pepe wrote: You also need to start the util using the PATA port. That's exactly what I mean. |
|
| Author: | LostDataSa [ February 9th, 2025, 10:37 ] |
| Post subject: | Re: SSD PC SATA-PATA Bridge Errorr |
I am using the original PATA-SATA that came from Acelab |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|