SSD PC SATA-PATA Bridge Errorr

[LostDataSa]

Hi I have a Kingstone SATA SSD with CP33238B
but after shorting the pin to start Safe mode I get this error
I am using Acelab PC PATA-SATA

Attachments

SATA-PATA.PNG (10.43 KiB) Viewed 15751 times

[Lukas]

And when starting the program you select the appropriate PATA port, not SATA?

[LostDataSa]

And when starting the program you select the appropriate PATA port, not SATA?

Yes

[Lukas]

The message clearly suggests using the application's SATA port rather than the PATA port.
If everything is connected correctly on original Acelab adapters contact their support.

[pepe]

No, the message says the utility has problems getting data through the INTERNAL (on-board, marvel 88SA8052) PATA-SATA bridge and suggests to use one of the PATA ports with the jmicron PATA-SATA (JMS20330) bridge attached. You also need to start the util using the PATA port.

[Lukas]

You also need to start the util using the PATA port.

That's exactly what I mean.

[LostDataSa]

I am using the original PATA-SATA that came from Acelab