hello suddenly i got this error on the pc-3000 III portable
i reinstalled ,restarted the pc,updated the usb driver . but same! it wont recognize any USB HDD of western digital ...... windows sees the hdd and the hdd is recognized in diagnostic mode! please help

Techno mode key
Techno mode key......................... : Techno key error: unexpected error: Device error detected

Debug Stop Code reading................. : HDD status reading error: unexpected error: Hardware Error : Undefined SCSI error ASC: 0x44; SCQ: 0x81

HDD Status sector....................... : HDD status reading error: unexpected error: Hardware Error : Undefined SCSI error ASC: 0x44; SCQ: 0x81

RAM:
HDD Info reading........................ : HDDs RAM reading error: unexpected error: Hardware Error : Undefined SCSI error ASC: 0x44; SCQ: 0x81

ROM:
Read ROM................................ : HDDs ROM reading error: unexpected error: Hardware Error : Undefined SCSI error ASC: 0x44; SCQ: 0x81

Relocations............................. : 0 (0)

Service area:
Power up log reading.................... : RAM Table reading error: unexpected error: Hardware Error : Undefined SCSI error ASC: 0x44; SCQ: 0x81
SA dir reading (ID)..................... : Ok
Dir items loaded........................ : 0
HDD has been prepared for data recovery

SA Access............................... : Copy 0,Copy 1

Configuration reading................... : Module ID 02 reading error: unexpected error: Hardware Error : Undefined SCSI error ASC: 0x44; SCQ: 0x81

Drive ID reading errorr Hardware Error : Undefined SCSI error ASC: 0x44; SCQ: 0x81
Syncro call exception "Access violation at address 000000000AC1115A in module 'PCWDCM~1.DLL'. Read of address 0000000000000036"
Techno key error: unexpected error: Device error detected