HDD GURU FORUMS
http://forum.hddguru.com/

maxtor n40p
http://forum.hddguru.com/viewtopic.php?f=11&t=7348		 Page 1 of 1
Author:  HDDTECH [ July 2nd, 2007, 17:19 ]
Post subject:  maxtor n40p
GOT 6E040L0 DRIVE WITH TYPICAL PROB... IT REPORTS 6E040L1 AND FIRWARE CODE NAR INSTEAD NAR OTHER MODULES OK HOW TO GET RID OF THESE PROBLEM ANY HELP WILL BE APPRECIATED
Author:  wawalab [ July 3rd, 2007, 0:20 ]
Post subject: 
hi HDDTECH:
whats your means for "FIRWARE CODE NAR INSTEAD NAR "??? :shock:
Author:  HDDTECH [ July 3rd, 2007, 9:46 ]
Post subject: 
i mean NCR instead of NAR .......
Author:  rameez [ July 3rd, 2007, 13:12 ]
Post subject: 
PM me i have solution to this probelm .
Author:  wawalab [ July 3rd, 2007, 15:30 ]
Post subject: 
into ALT SA.
Author:  RJARRRPCGP [ July 11th, 2007, 21:21 ]
Post subject:  Re: maxtor n40p
HDDTECH wrote:
GOT 6E040L0 DRIVE WITH TYPICAL PROB... IT


What typical problem is that?

I have one for the PC I'm at right now.
Author:  mulan [ July 23rd, 2007, 10:46 ]
Post subject:  Re: maxtor n40p
try self scan if the drive have altsa (this is the only succesfully method that i know)
Author:  arfaizy13 [ July 25th, 2007, 14:47 ]
Post subject:  Re: maxtor n40p
u put hdd in safe mode and load ldr then it will become 6e040l0 then u chk modules, i have solved this type of problems in some hdds of 6e040l0, i got this type of prb when i wrote datacopy1.smb to drive, then its p-list was damaged, then i corrected this
u also chk, it may solve ur problem
Author:  rameez [ July 26th, 2007, 12:09 ]
Post subject:  Re: maxtor n40p
the problem is in plist rewrite in safe mode with appropriate loader with RAM loaded .
Author:  arfaizy13 [ July 26th, 2007, 15:34 ]
Post subject:  Re: maxtor n40p
ya, correct solution, u find the correct ram and ldr for this hdd, first u put hdd in safe mode, load ldr. if plist is damaged then u write RAM and write plist, i hope the problem is solved now.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/