| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| Maxtor 4D080H4 http://forum.hddguru.com/viewtopic.php?f=11&t=7599 |
Page 1 of 1 |
| Author: | HDDTECH [ August 21st, 2007, 16:37 ] |
| Post subject: | Maxtor 4D080H4 |
This drive spins and seek ok , but it keep in busy mode. i did hot swap, no good, i try to read in safe mode same thing.... how to fix any heip will be appreciated. |
|
| Author: | rameez [ August 22nd, 2007, 10:24 ] |
| Post subject: | Re: Maxtor 4D080H4 |
Head parks or not . |
|
| Author: | pcimage [ August 25th, 2007, 5:31 ] |
| Post subject: | Re: Maxtor 4D080H4 |
HDDTECH wrote: This drive spins and seek ok , but it keep in busy mode. i did hot swap, no good, i try to read in safe mode same thing.... how to fix any heip will be appreciated. I got the same thing with a Samsung HD160JJ, sounds OK but never becomes ready. Even with Hot Swap! 
|
|
| Author: | cryoborgofthevenus [ August 27th, 2007, 6:39 ] |
| Post subject: | Re: Maxtor 4D080H4 |
What about initializing from internal SA using ISA version ? |
|
| Author: | Starling [ August 29th, 2007, 13:35 ] |
| Post subject: | Re: Maxtor 4D080H4 |
safe mode->loader->check SA. |
|
| Author: | rameez [ August 30th, 2007, 13:45 ] |
| Post subject: | Re: Maxtor 4D080H4 |
Initialization from SA is also option of PCI . |
|
| Author: | wawalab [ September 5th, 2007, 10:50 ] |
| Post subject: | Re: Maxtor 4D080H4 |
replace PCB try it again 
|
|
| Author: | arfaizy13 [ September 8th, 2007, 1:41 ] |
| Post subject: | Re: Maxtor 4D080H4 |
if hdd does not park then its fw problem. if hdd parks, then mostly its card prb |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|