HDD GURU FORUMS
http://forum.hddguru.com/

PCB Test with Universal Utillities
http://forum.hddguru.com/viewtopic.php?f=11&t=7764		 Page 1 of 1
Author:  quasimodo [ September 21st, 2007, 21:48 ]
Post subject:  PCB Test with Universal Utillities
Hello Guys,

I am courious about the Controller checking functions located in the Universal utilities.
Especially: Cyclic NOP Sending, BUS Test, HDD cache RAm Test.
Could anyone explain what an incorrect output from these tests would look like and what they indicate?

Thank you so much.
Author:  coolmac [ October 1st, 2007, 11:52 ]
Post subject:  Re: PCB Test with Universal Utillities
same question.
hi,guys,who has the manual of pci3000's Universal Utillities(v2.21 or above)which i seek for ages .and also would like to share with me ?in return to this,i will offer you something interesting.
Author:  coolmac [ October 1st, 2007, 11:57 ]
Post subject:  Re: PCB Test with Universal Utillities
8)
Author:  Amarbir[CDR-Labs] [ March 16th, 2008, 14:59 ]
Post subject:  Re: PCB Test with Universal Utillities
Hi Guys ,
Did you Exchange That or something interesting with each other humm ,me interested also for a pm

:good:
Author:  coolmac [ April 13th, 2008, 16:53 ]
Post subject:  Re: PCB Test with Universal Utillities
if a certain manual concerns 3k that you are looking for at the moment.i would like to share it with you guys.pm or write me in the thread ,gather together on the learning way.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/