| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| Maxtor ARES 64K 2F020J0 (VAM51JJ0) 'Initialization error' http://forum.hddguru.com/viewtopic.php?f=11&t=8204 |
Page 1 of 1 |
| Author: | yco [ December 15th, 2007, 13:16 ] |
| Post subject: | Maxtor ARES 64K 2F020J0 (VAM51JJ0) 'Initialization error' |
Greetings everybody! HDD is spinning, cannot hear any knocking, detected by PC3000 UDMA as: Code: Model: Maxtor ARES C64K Serial: Firmware: VAM51JJZ Capacity: 38.29GB (80 295 529) It shows following error when trying to start Utility: Code: Initialization error Context: Read roadmap Content: Device error detected Is there any chance to get data back from this drive? I don't have the same drive to create a loader. Any suggestions? |
|
| Author: | rameez [ December 16th, 2007, 9:15 ] |
| Post subject: | Re: Maxtor ARES 64K 2F020J0 (VAM51JJ0) 'Initialization error' |
Load any loader of any Aresc64k drive if u dont have download from hddguru files section enter the utility and create loader from there and restart the procedure again . |
|
| Author: | yco [ December 19th, 2007, 9:34 ] |
| Post subject: | Re: Maxtor ARES 64K 2F020J0 (VAM51JJ0) 'Initialization error' |
Hi rameez, I used a loader from Download section (for 40GB HDD) and it worked. It was G-List deffect, cleaned it and it helped. Thanks for all help, greetings, Pawel |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|